That would depend on what contaminate was in the water. Certainly, dirty water carries disease, so don't drink it... and stay out of it.
A dirty or clogged screen can cause the low water presser remove shower head and clean. If not it could be calcium deposits built up on shower head if so soak shower head in a cleaning solution for several hours if that dose not work buy a new shower head. (note some shower heads have a low flow re-stricter in some cases you can remove this and get more water pressure)
No you are not dirty because everyone does it. Don't not shower, but it does not mean that you are dirty when you poo.
The ball connector is what the shower head rotates on to point the shower head in different directions
To tighten a shower head properly, use an adjustable wrench to securely tighten the connection between the shower arm and the shower head. Turn the wrench clockwise until the shower head is firmly in place. Be careful not to overtighten to avoid damaging the shower head or the plumbing.
To change a shower head, first, unscrew the old shower head using a wrench. Then, clean the shower arm threads and wrap them with plumber's tape. Finally, screw on the new shower head and tighten it securely.
Some options for a shower head pipe extension to increase the height of your shower head include purchasing a longer shower arm, using a shower arm extension, or installing a ceiling-mounted shower arm.
Well, if they don't shower regularly of course they're gonna be dirty.
The purpose of the shower head arm in a bathroom is to hold and position the shower head at a suitable height and angle for the person using the shower.
From the dirty pool you are likely to get skin rash, vomiting and loose motions.
The Shower Head was created on 1996-02-15.
Aerator in shower head is plugged up. Unscrew head, clean it out, and replace. Make sure you have teflon tape on hand for the treads on the shower arm when putting the head back on.
A shower! So you don't soak in dirty bath water!