No , the glue will not apply smoothly and will not make a lasting joint.
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
The recommended dry time for PVC glue before turning on water is typically around 2 hours.
You should wait at least 2 hours for PVC glue to dry before turning on the water.
its glue spicily for pvc pipe only
PVC glue should dry for at least 2 hours before turning on water to ensure a strong and secure bond.
A PVC pipe glue will take at least 4 hours to dry. 12 hours before putting water pressure in it.
Pvc glue cost about $6.49 a can about 8 ounces.
For water pipes, it is recommended to use a specific type of glue called PVC cement or solvent cement. This type of glue is designed to create a strong and watertight bond between PVC pipes and fittings. It is important to follow the manufacturer's instructions carefully when using PVC cement to ensure a secure connection.
with PVC glue
There are many solvent glues that have been specifically formulated for use with different plastic pipes. Depending on the schedule of the piping 40, 80 etc what type of glue you want to use, some are slow setting some set very quickly and the choice of the glue also would depend on the ambient temperature and humidity factor. It also depends on whether you want to use the glue for waste or water. Water PVC pipes need high pressure glue where as waste pipes don't.
You just pull it apart really hard. PVC glue will not effectively glue ABS.
PVC glues will work on PVC type plastics if a primer is applied. This is a specialised glue for piping and MAY glue other items, but don't expect too much.