answersLogoWhite

0

What else can I help you with?

Related Questions

What do you use to float in the swimming pool?

So you don't sink.


How do you travel water from a sink to a pool?

You can use a hosealternetively, use a bucket or a jug.


Which swimming pool filter has the highest rating?

The best or highest rated swimming pool filter depends upon the use of the pool because a high use pool needs a higher quality filter. The most popular and therefore rated highest in the popularity sense are the Pleatco cartridges.


Can you use chlorine in a pool without a filter?

Yes, you can use chlorine in a pool without a filter, but it is not recommended. A filter is essential for removing debris and contaminants from the water, and without a filter, the effectiveness of the chlorine may be reduced, leading to poor water quality and potential health risks. It is best to use both chlorine and a filter for optimal pool maintenance.


Can you use an in-ground filter on an above ground swimming pool?

Sure


What setting should you have your pool on for normal operation?

If you're talking about your pool filter, it should be set to filter or run. Use the bypass or recirculate setting if you wish to circulate the water without having the water pass through the filter. Use the backwash setting to clean the filter.


How do you sink floating pool steps?

To sink floating pool steps, you can add weight to them through the use of sandbags or heavy objects. Slowly add weight to the steps until they sink to the desired depth in the pool. Alternatively, you can also use pool step weights that are specifically designed to help keep floating steps in place.


How do use a multi valve pool filter?

Need more specific info A multi valve pool filter is a common configuration of valve and filter for a swimming pool system. The piping into and out of the filter is attached to a multivale. A multivalve has has several positions. One type of multi valve has six positions: backwash, waste, filter, closed, rinse and recirculate. (These valve positions are used on a DE filter. A sand filter may be different.) Use the filter setting in the nromal operation of your pool. This setting receives water from the pump and directs it to the dirty side of the filter media and then receives weater from the clean side and directs it to the pool. Use the Backwash setting to flush the DE from the filter and to a drain. Use the waste setting to flush water directly from the pump to the drain. The closed position is, well, closed. Rinse? Recirculate?


Why is soap scum coming into pool through sand filter since treating pool for black algae?

dont use soap use clorine


How often do you use a pool filter when you have very little use?

I run the filter every night for 6 to 8 hrs no matter what and make sure my skimmer has chlorine in it.......never have had bad pool water and there are days even a week of no use. If you don't filter it daily you will get sediment on the bottom and algae.


You heard new pool water is green and turns blue in a few days is this true?

You have to treat pool water with pool chemicals and use a pool filter to get and keep the water clear.


I have a Pop up pool can you use salt water in it with the original filter system?

Yes