0
Yes, the filter pump must run for the heat pump to effectively heat the pool water. The heat pump relies on water circulation to extract heat from the air and transfer it to the pool water. Without the filter pump operating, water won't flow through the heat exchanger, preventing the heat pump from functioning properly. Therefore, it's essential to have the filter pump running whenever the heat pump is in use.
What else can I help you with?
Why doesn't the pool filter run?
Pool filters do not get cloged the pump is the problem
Should an ingound pool filter be run at the same time as a pool heater or can you just run the heater alone?
Heaters are usually plumbed in after the filter. The pool filter/pump is what circulates the heated water. Ans: The heater will not work or fire if the pump is not running.
On a 27' round above ground pool how often should you run the pump in the filter position?
Always run the pump in filter, for atleast 4 to 5 hrs a day , never run the pump in anything else but filter , only time you change filter setting is when you back wash you filter, also when you ope your pool and shock it for the 1st time run the filter over night then back wash next day
How much does an electric pool heater run?
Pool electric heat pump prices differ according to the size of the heat pump and the services offered. Pool heat pump prices range between $2500 at the low end, and $4800 on the high end.
Do you leave filter pump on while shocking your pool or?
Yes, you should run the pump when you add chemicals to your water,
Should you run the above ground pool filter with people in the pool?
Yes. Running the pool filter pump while swimming has no adverse effects to the swimmers.
Will a 4000 gallon per hour filter type pool pump be strong enough to run a pool vacuum with hoses?
Need to know what horse power you are thinking of. B T W the pump is not the filter. The filter is the large tank.
When you run swimming pool pump on filter do not get good suction at skimmer when run on circulation plenty of water flows out of jets side of pool do not think filter blocked any answers please?
Me quit
What will happen if theirs to much pressure in a sand pool filter?
The flow will be restricted and you will have to run the pump longer and this will shorten the life of the pump. Above 50PSI you run the risk of causing the case of the filter to explode. Hatawa
Do you run the pump after putting flocculent in?
When you put floculant in the pool you do not run the pump. you let the pool sit still for about two days. This will allow it to settle. After that time you will notice that there Is a cloudy area at the bottom of the pool. This is the floculant and all the contaminants that it has dragged down to the bottom as it settled. This will need to be vacuumed to waste DO NOT PUT THIS STUFF THROUGH THE FILTER,(VACUUM IT TO WASTE.) It's ok to pump it but not to run it through the filter.
How much time should the filter be running after a new pool is plastered?
The filter doesn't run, the pump does. A good rule of thumb is that the pump be sized so as to turn the entire amount of water in the pool over in 8 hours.
How long does it take to filter a 32000 gal pool?
You should run the filter on your 18 x 4 pool for at least 6 hours per day or for as long as direct sunlight shines on the pool. In very warm climates, you will need to run the pump for at least 8 hours.
