answersLogoWhite

0

In a lawn irrigation application it should generally be deep enough not to be hit by the lawn-mower, or rototiller if you plan to use one

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is meant by sch40 PVC?

Schedule 40 PVC is the type and thickness of water pipe.


How much does 6 inch PVC pipe cost per foot?

I found it for around $22/each for a 10ft length.If you prefer SCH40 PVC you're looking around $30/each for a 10ft length.


Can PVC pipe be buried?

Yes it should be


What pipe should you use for above ground pool?

PVC pipe is fine


Why doesn't the 1 inch shark bite fitting fit on a 1 inch PVC pipe as advertised?

It should, are you sure your pvc pipe is round


What is the best PVC pipe leak sealant to use for repairing a leak in a PVC pipe?

The best PVC pipe leak sealant to use for repairing a leak in a PVC pipe is a solvent-based PVC cement specifically designed for PVC pipes.


How do you join polyethylene pipe to PVC pipe?

It depends on the size of PVC. For smaller PVC you can buy fittings that glue onto the PVC and allow a thread x barb fitting to be installed. For larger pipe you should get a brass compression fitting that clamps down on the PVC and adapts to a thread x barb fitting.


Do you use PVC pipe cement when connecting a PVC pipe to a galvanized metal pipe?

No, do not use glue. Use teflon tape or pipe dope on the threads. You should also make sure you always put the male PVC thread into the female metal thread. If you do it the other way you will tend to split the PVC fitting when you tighten the threads.


How can I repair a PVC pipe?

To repair a PVC pipe, you can use a PVC pipe cutter to remove the damaged section, clean the area, apply PVC primer and cement, then connect a new piece of PVC pipe using a PVC coupling or repair fitting.


What is the difference between a 1 PVC pipe and a 1K PVC pipe?

I was in the PVC pipe manufacturing business for over 30 years and have never heard of a "1K PVC" pipe. If "1K" means a 1,000 psi pipe, this does not exist as a commercial product. Sorry.


Is PVC pipe good for glycol circuits in chillers?

PVC pipe is an acceptable product to use in chillers that contain glycol. You should never use galvinized pipe where glycol is used. Copper is acceptable as well.


What is a PVC?

An instrument made of PVC pipe.