Fiberglass pool shells are shipped in a single piece directly from the manufacturer. As a result, you don't actually linea pool with fiberglass the way you would with concrete or vinyl. Instead, installing a fiberglass pool simply means digging a hole in which to place the already completed shell.
air pocket behind pool liner inground
Filter it then swim in it.
They don't make them for in ground.
No. Replace the liner.
I had an inground pool installed. We just turned on the lights at night and noticed footprints on the bottom. Can this be fixed? Call the pool company back. The bottom is normally sand mixed with cement. The liner will probably have to be removed and bottom smoothed. They should have checked that before installing the liner. Those printswi catch sediment and debris for the life of the liner.
To repair an indentation in an inground pool liner, first, drain the pool below the level of the indentation. Smooth out the area by using a roller or your hands to push the liner back into place. If the indentation is due to air or water trapped behind the liner, you may need to create a small hole to release the trapped material and then seal it with a patch. Finally, refill the pool to check if the repair holds and the liner remains smooth.
Yes it can be done
Termites can and do cause damage to pool liners.....The trmites will come through cracks in the vermiculite and actually eat through a liner.
Remove the old damaged liner and install a new one.
Another new or used retainer.
Yes, but it would be very expenses..
YES.