Remove the heater control valve and replace it.
To replace the water heater control valve, first turn off the power and water supply to the heater. Drain the tank and disconnect the old valve. Install the new valve following the manufacturer's instructions. Reconnect the power and water supply, then test the new valve to ensure it is working properly.
To replace the pressure relief valve on a water heater, first, turn off the power and water supply to the heater. Allow the water to cool down. Next, locate the valve on the top or side of the heater and unscrew it using a wrench. Replace it with a new valve of the same size and pressure rating. Finally, turn the water and power back on and check for leaks.
it is located on the passenger side wheel well...it has 4 hoses attached 2 going into the heater core and 2 going into the engine...simply disconnect the hoses and replace with new heater valve
Replace the heater control valve motor, a dealer part, costs around $166.00.ish
To replace the heater valve on a 2001 Ford Fiesta, first, ensure the engine is cool and disconnect the battery. Drain the coolant from the cooling system, then locate the heater valve, which is typically situated near the firewall. Disconnect the hoses attached to the valve, remove any mounting screws, and replace it with a new valve, reattaching the hoses securely. Finally, refill the coolant, reconnect the battery, and check for leaks.
A 1999 Dodge Ram does not have a water control valve.
take it to a garage!!
woot woot
To replace a water heater gas valve, first turn off the gas supply and water heater. Disconnect the gas line and pilot tube from the old valve. Remove the old valve and install the new one in its place. Reconnect the gas line and pilot tube, then turn the gas supply and water heater back on. Be sure to follow all safety precautions and manufacturer instructions.
Try the heater valve.
I was charged $464.00 and I thought that was a bit rich to replace a T&P Valve today 26/09/11