answersLogoWhite

0

You need to use forced air through the suction pipe from the pool pump, to the skimmer, this will blow out any debris trapped inside. you can use the air out port on a shop vac. hope this helps.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the liquid line and suction line?

The suction line is the big one. This line should be cold when the unit is on. The small line is the liquid line.


How do you tell the suction line in central air conditioning from the high side line?

The suction line will be the larger line going into the compressor.


On a side-wall suction type pool cleaner how can one determine the cause of lost suction at the wall and where the problem is?

When was the last time you cleaned the pool filter?????


How should an air conditioner suction line feel to the touch?

A suction line is usually cold to the touch.


Is the suction line the high side?

No, the liquid (discharge) line is the high pressure side. The suction line is the low pressure side.


What side of compressor is suction on 5.9 V8 1996 Dodge?

The larger line is suction. The larger line is the suction side which should be on the right side of the compressor......


Why is the suction line of a pump larger than the discharge line?

It is common practice to specify the pump suction line one size larger than the pump discharge line in order to increase the Net Positive Suction Head available (NPSHA) to the pump. A smaller suction line the same pipe size as the discharge line would result in more pressure drop in the suction line and reduce the amount of head available to the suction side of the pump. This in turn would result in an operating point closer to cavitation of the pump.


What indicates a problem while inspecting a suction line of an air conditioner?

"What" on the suction line of an air conditioner indicates a problem?


Skimmer open or closed to vacuum pool?

If you have a dedicated suction for the vacuum hose (illegal in Australia) then you close the skimmer to increase suction.


How can one unblock a blocked drain?

One can unblock a blocked drain by using products such as Liquid Drain, which can be purchased at Homebase. In addition to this one can use a plunger, the suction from a plunger over a plughole can allow one to clear the blockage.


Your ingound pool has to much suction you cannot move the brush on the bottom of the pool even with the valve almost fully open?

You can get a by pass valve that will alleviate some of the suction by taking water into the hose at another point.


How do you stop water from flowing through plumbing in order to repair a PVC line to a booster pump in a pool?

There are special plugs that fit into the return and suction fittings in the pool. They come in various sizes and configurations. The first thing is to turn off the pump.