Typically you would tee into the Plumbing after the pump and filter with a small hose and a valve that runs to the plumbing on the slide.
yes in order for the pump to work the water has to be over it
Your pool pump needs to be pushing the water through your solar system
Yes, you should run the pump when you add chemicals to your water,
You should run your pump about 12 hours each day to keep water clean. You can put your pump on a timer to save money. Don't do that until your water clean and clear. If you are still working to get your water just right you need to keep your pump going full time.
Pump it into the sewer or just run it into the garden.
Heaters are usually plumbed in after the filter. The pool filter/pump is what circulates the heated water. Ans: The heater will not work or fire if the pump is not running.
Yes
You could use your pool pump. or get a submersible pump. it is also not difficult to siphon an above ground pool with a pool vacuum hose. all you need is somewhere to run the water to.
check for air leakes if not remove pool pump and run by self and se if it is sucking air
Long enough to turn over the full amount of water in the pool every 24 hours.
Pool filters do not get cloged the pump is the problem
You need a salt water chlorinator. A salt water chlorinator is an electronic devise that converts the salt in the water from the pool into chlorine gas that is then absorbed into the water.