0
What else can I help you with?
How can I customize a fiberglass pool to look like I want it to look?
You can customize your pool by adding accessories like a slide. It's not really possible to modify the pool itself and there are limits to how much you can change the appearance. There are professional pool design companies that can custom design and manufature a pool for you. I would check out www.splashdesignsllc.com they are one of the best in the US.
Why does the spa draining back into your pool after the system shuts down?
You need to have your check valve replaced.
How do you blow up a kiddie pool?
To blow up a kiddie pool, first ensure you have a suitable air pump, which can be manual or electric. Begin by locating the air valve on the pool and removing any caps or plugs. Insert the pump nozzle into the valve and start inflating until the pool reaches the desired firmness, then securely close the valve. Always check for leaks or damage before filling the pool with water.
What do pool worms look likelook like?
there is no such thing as a "pool worm"
Swimming pool 'infinity' what does it mean?
An infinity pool is a type of pool where one edge is designed to look like it doesn't exist. This creates the pool to look like it goes on for infinity or into the horizon because you can't see the edge of the pool.
How do you tell if pool valve is open or closed?
To determine if a pool valve is open or closed, check the position of the valve handle. Typically, a valve handle that is aligned with the pipe indicates it is open, while a handle that is perpendicular to the pipe signifies it is closed. Additionally, you can observe the flow of water; if water is flowing through the system, the valve is likely open. In contrast, if there is no flow or pressure, the valve may be closed.
How can you move ground water away from an inground pool dig?
First of all if the water table it too high you do not want to drain at all for your pool will act like a boat and float up out of the ground. If you are going to empty and refill rather quickly say 3 days or less. In the main drain of your pool there is a check valve that allows ground water to seep into the pool so when the water table gets to high your pool don't float. The valve is a one way valve that pops up when ground water is refilling your pool.Put a brick or something heavy over the valve to prevent it from opening and pump out your pool.Be sure to refill pool soon. Kenny Kummer Brody chemical
What does the triangle in pool look like?
it looks like a triangle
What do mosquitoes babies look like in pool water?
They look like baby tadpoles, they are small black and have a tail. They wriggle around like small worms in the pool water.
Can a pool PVC check valve be repaired with glue?
Possibly, if you don't interfere with the motion of internal parts. -Check valves are not expensive, better to replace it if any doubt exists.
Whats the purpose of a hydrostatic valve on a swimming pool?
It is used to allow rising ground water into the bottom of a pool to stop boyancy , which could potentially lift the entire pool like a boat.
How do you plug your blow up pool?
To plug your blow-up pool, locate the air valve, which is typically found at the top or side of the pool. Use the plug that came with the pool, inserting it securely into the valve to prevent air from escaping. If the pool has multiple chambers, ensure all valves are plugged to maintain proper inflation. Finally, check for any leaks by feeling around the seams or using soapy water to identify bubbles.
