No it either means you have to clean your pool more often or it can mean that the radials in your sand filter are stating to wear and need replacing.
The cleaning schedules varies from filter to filter, but a general guideline on any swimming pool filter is to take a reading when the filter is clean, then clean the pool filter when the pressure rises about 10 psi.
From the pool
A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.
You can not measure the pressure in a swimming pool. If you mean the pressure on the filter tank gage then you may have to backwash the filter. Talk to your local pool store for instructions as how to maintain a swimming pool and the equipment. Get some education on swimming pool maint. before you get into some real trouble. A pool is not too forgiving for someone without a basic knowledge of pools.
Salt is not a filter, it is added to pool water to allow a chlorine generator to operate.
form_title=Pool Filter form_header=Pool service professionals are available to help you with all of your pool filtration needs. Are you having problems with the filtration system of your pool?*= () Yes () No Do you need a pool filter installed?*= () Yes () No Is your pool above ground or in ground?*= () Above ground () In ground Is your pool a chlorine or salt water pool?*= () Chlorine () Salt water
You don't have to change the pool filter for years Unless it gets damaged. You do however have to clean the pool filter whenever the presure leading to the filter gets too high. This indicates a dirty filter that is not allowing water to get through effectively.
Plugged pump, very dirty filter. Do you actually mean the filter or the pump. Filter is big tank. Pump is small unit with motor attached.
The sand filter wont make a pool green this happens a s a result of algae.
To bypass a non functioning pool filter, or to keep your pool filter in pristine condition, first you need to back wash the pool. Once the pool has been back washed, you will need a leaf skimmer, a telescoping pole, a tile brush, a pumice stone, an algae brush, and a pool vacuum.
There is no filter at the bottom of a pool. Perhaps you are looking at the hydrostatic valve which is there in case your pool is emptied and Will make sure that the pool wont float in ground water.