drill them out and use stainless steel ones next time
Add thru the skimmer box
The skimmer may not be working on your pool due to clogging, a malfunctioning pump, or a leak in the skimmer system. It is important to check for these issues and address them promptly to ensure proper functioning of the skimmer.
Your pool skimmer may not be working properly due to clogs in the skimmer basket, a malfunctioning pump, or a leak in the skimmer system. Regular maintenance and troubleshooting can help identify and fix the issue.
Google Aladdin pool equipment ( Lilly Pad skimmer)
You only use the skimmer/s
Adding algae control to the pool skimmer helps to disperse the chemical and coats the filter media.
Attempting to obtain step by step diagrams connecting an above ground pool to a sand filter.
Actually, they aren't a bad thing to remove all together. Skimmer flaps are a notorious place for algae, especially black or mustard, and bacteria to hide and grow, which makes reoccurance terribly probable. Removing them all together will not harm the performance of your pool. I beg to differ with the answer above - The skimmer works because the water jets create a flow which pushes the water past the skimmer. The skimmer is pulling water down which causes debris on the top of the water to get caught in the basket. The skimmer flap(s) limits the amount of water being sucked in by the skimmer causing more suction and making the skimmer more efficient. It is important for the skimmer doors, or "weirs" as they are called, to be in place for your skimmer to work properly. Try it for yourself. With the skimmer running, place your hand, a brick or some other obstruction where the skimmer door should be. Restrict the water flow a bit in some way. You will see a much larger volume of water being sucked into the skimmer than with no door at all. If you already have a flap or wier in place, do the reverse. With the skimmer running, hold the door completely open and see hose the flow virtually ceases. Replacement weirs or flaps can easily be found at your pool store. Just take your old one with you or measure the opening where it should sit. Little pegs on the sides of the replacements are spring loaded to keep it properly situated so it is very important that the new weir be exactly where you want it before pulling the pins securing the pegs. I hope this has helped!
The pool's manufacturer. They are not at all standardized across brands, so you need to know what brand your skimmer or pool is, and it helps if you can locate a pool store and bring the old skimmer to them - they may be able to order one, even if they don't have that brand in stock.
Yes possibly In reality, the skimmer will not cause a leak. What causes leaks are people who do not connect or glue the fittings to the skimmer properly. Or ground movement like earthquakes. k
Get a better pool skimmer normal pool skimmers usually don't do a very good job of cleaning rubbish from the surface of a pool so try a floating pool skimmer have a look on www,dragonfly.biz
Yes, the skimmer flap should be removed when closing a pool for winter. Removing it helps prevent water from freezing and causing damage to the skimmer and plumbing lines. Additionally, it allows for proper water drainage, reducing the risk of ice expansion that could crack the skimmer. Always ensure the skimmer is properly winterized to protect your pool equipment.