First of all I'm not a pool expert, but I've owned a pool for a bought 25 yrs. I live in Ohio and I have a 23,000 gallon vinyl liner pool with a sand filter system. First thing you need to do is make sure your alkalinity is at least 50 ppm. for copper sulfate to work properly. My pool used to be totally dark green when I opened it. I now use 2 table spoons of copper sulfate when I open it in the spring and it goes from green to clear in a bought 2 days. I also use the same amount in the fall when I close it, but make sure you circulate the water for 2 days before you close it. Make sure you mix the copper sulfate with water in a plastic container, make sure the blue crystals are dissolved. I use a 2 gallon plastic container with a sprinkler head on it like you use to water flowers with, this makes it easy to sprinkle the copper sulfate mixed with water in the pool evenly. You can buy copper sulfate at your local hardware store or on ebay. I'm sorry this information is so long, but I know what you're going through, because I've been through it. I hope this helps you. P.S. I only use use copper sufate in the spring and the fall. I do not use it during the season as a chlorine substitute as some people say they do, as to much copper in your water can cause you problems.
No if any thing it will increase it as algae uses sunlight
Salt water pools are chlorine pools it just that the chlorine is electronically made from the salt. Salt water pools have problems with algae the same as just freshwater chlorine pools. If you are lucky you may be able to nip algae in the but by over chlorinating but more often then not you would be well advised to throw some algaecide in the pool to kill it of. (Always follow the directions on the bottle.)
Yes you can. Start with 1/4 the normal amount that a salt pool would use.
Tetra Pond Algae Control is effective in managing and preventing algae growth in ponds. It helps to control algae blooms and keep the water clear. Regular use can help maintain a healthy pond environment.
Chlorine is less likely to dissapate when proper levels of cyanuric acid are present. If chlorine levels are within limits and algae is still present test for ortho phosphates and treat if neccessary. Brush the affected areas (and setps & walls) regularly.
Chlorine is used in pools to disinfect the water by killing bacteria, viruses, and algae. It helps maintain safe and sanitary swimming conditions for swimmers by keeping the water clean and free from harmful contaminants.
Chlorine itself is not visible in swimming pools, but you can see its effects in the form of clear, clean water. Chlorine is added to pools to disinfect and kill bacteria, algae, and other microorganisms that can make the water cloudy or green.
It depends. If you want to clear your water of suspended particulates, filter the water with activated charcoal . If you want to clear your pond of algae, you have to balance circulation, oxygenation, temperature, exposure to sunlight, plants, fish and other animals, and feed so that the conditions of your pond maintain control of algae production. If any one of the conditions are out of balance, extraordinary means (additional filters, manual removal, etc.) will be necessary to control algae. If the water feature does not need to sustain life, you can use a chlorine puck in the reservoir. This should stop future algae growth. The pucks must be replaced from time to time....
Algae is not cause by soapy swimsuits, or what you wash them in. It's caused by low levels of chlorine or non at all. If the chlorine is too low and the sun is shining that is a breeding ground for bacteria and algae. To prevent algae watch the levels of chlorine and shock regularly. Don't forget to put in algaecide as well, that helps prevent it too. Wash your swimsuits in whatever you like, but make sure that after they are freshly washed that you rinse them well before going in the pool. Bathing suits will most likely cause foam or sudsy looking water, not algae.
Your pool water may have turned green even after adding Fresh and Clear because of metals in your water. It is likely copper that is causing the water green. Your pool store will have products available to remove the metals and clear your water up. You might also have algae if you are not putting enough chlorine in the pool.
Green pool water is caused by algae growth. When chlorine levels drop below 1-parts-per-million, algae will begin to grow. To get rid of the algae, turn on the pump so chemicals will circulate through the water. Correct the pH level of the water by adding an acid or a base to bring the pH level to a 7 or 8. Clean any debris out of the pool. With a nylon brush scrub the pool, breaking up the algae. Add shock to the pool, and continue running the pump throughout the cleaning process. The water will be cloudy when the shock is first added, but will soon begin to clear. Once the water is clear, vacuum the algae from the pool.
Chlorine helps to disinfect pool water by killing bacteria, algae, and other microorganisms. It also oxidizes organic contaminants, helping to keep the water clear and safe for swimmers. Maintaining appropriate chlorine levels is essential for a clean and sanitized swimming pool.