0
On a Raypak heater, the pilot light is typically located near the burner assembly, usually at the bottom of the unit. It can be accessed by removing the front panel or cover of the heater. The pilot light is a small flame that ignites the main burner when the heater is activated. Always refer to the specific model's manual for precise instructions and safety information.
What else can I help you with?
What are the rating on Raypak swimming pool heaters?
That would depend on which heater model.
Why does the water heater pilot go out?
The water heater pilot can go out due to issues such as a faulty thermocouple, a dirty pilot light, or a lack of gas supply.
What is the best kind of pool heater for an inground pool in New Jersey?
I prefer the Raypak. I have had far less problems with this brand than all others in the last 25 years.
How do I turn on the water heater pilot?
To turn on the water heater pilot, locate the pilot light button or knob on the water heater. Turn the knob to the "pilot" setting and hold it down. While holding the knob down, use a long lighter to ignite the pilot light. Once the pilot light is lit, continue holding the knob down for about a minute before releasing it. This should successfully turn on the water heater pilot.
How can I determine if the water heater pilot light is out?
To determine if the water heater pilot light is out, locate the pilot light access panel on the water heater. Look inside to see if the pilot light is lit. If it is not lit, you may need to relight it following the manufacturer's instructions.
What is wrong if your pilot light will not stay lite?
High winds, pilot generator. Is the heater located next to a wall? Is the heater door closed? Does the heater have a draft hood or what they call a stackless heater? Ken
How to light a gas heater with an electronic pilot?
To light a gas heater with an electronic pilot, locate the pilot light button on the heater. Press and hold the button while simultaneously pressing the ignition button. Keep holding the pilot button for about 30 seconds to allow the pilot light to ignite. Release the pilot button and adjust the temperature as needed.
Hot water heater pilot light works heater wont light?
Have you turned the control from Pilot to On? Have you increased the temperature setting?
What are the most popular brands of swimming pool heaters in the United States?
Hayward is a very popular brand of swimming pool heater. Raypak and Max-E Therm are other popular brands.
Why did the pilot light go out on the water heater?
The pilot light on the water heater went out because there was a lack of gas flow or a problem with the ignition system.
How can I relight the water heater pilot?
To relight the water heater pilot, locate the pilot light button or knob on the water heater. Turn it to the "pilot" setting and hold it down. While holding the button down, use a long lighter to ignite the pilot light. Keep holding the button for about a minute after the pilot light is lit to ensure it stays on. If the pilot light continues to go out, there may be an issue with the thermocouple that needs to be addressed by a professional.
Why water heater pilot won't stay on?
Thermocouple. Keep pilot knob depressed for 30 seconds after lighting pilot.
