Aggressive water chemistry and age.
You drain the water then plaster the walls from inside
To achieve a flawless finish on your walls with smooth plaster, start by properly preparing the surface by filling in any cracks or holes and sanding down any rough spots. Apply a primer to the walls before applying the plaster to ensure a smooth and even application. Use a trowel to apply the plaster in thin, even layers, working in small sections at a time. Sand the walls between each layer of plaster to remove any imperfections and create a smooth finish. Finally, apply a top coat of plaster or paint to achieve a flawless and polished look.
For quartz aggregate finish, somewhere around 3/8" on the walls and 1/2" or even thicker on the floor. Pebble will be slightly thicker. Premium Pool and Pavers, Spring Hill, Florida 727 271 5975.
The japanese put white plaster on the walls because it is fireproof
When was the replaster job done? Were there leaks before the "first" plaster job? Were those leaks determined to be in the walls of the pool or in the plumbing? To answer your question - most likely - yes. Hmm, what do you mean by several? Ken
The rough buildup on your pool walls are most likely calcium carbonate. Similar to stalactites and stalagmites in caves build in or on pool surfaces because there is a lack of chemical balance in the water. Your pH is running constantly at or above 8.0 pH. The only way to remove them now is to drain and acid wash and/or sand the pool surface. You are likely, too, to not be able to remove them completely but you will be able to control them with vigilant monitoring of your water chemistry. k
Yes, a stud finder can work on plaster walls by detecting the density changes caused by the presence of studs behind the plaster.
does it cover repairing plaster walls and repainting and fixng plumbing
Replaster the pool and keep the water chemically balanced (PH, alkalinity level etc..) this will keep the plaster from pitting thus keeping it smooth for a longer life.
Plaster walls do not have studs like drywall walls do. Instead, plaster walls are typically constructed using a wooden or metal lath framework that is attached directly to the wall studs. The plaster is then applied over the lath to create a smooth and durable surface.
Depending on what the plaster surface damage is to the pool, it really is pretty easy to repair the plaster on your pool. You just need a chisel, or a small angle grinder if you are really handy, a hammer, a trowel, some water and a sponge. they sell pool patch kits for all the pool surfaces. look for pool plaster patch kits and you will find an easy to use solution.
The best anchors to use for plaster walls are toggle bolts, molly bolts, or expansion anchors. These anchors provide strong support and are suitable for hanging heavy objects on plaster walls.