answersLogoWhite

0

This is becasuse of shape of commode. The lower part has a upward bend which does not allow the commode to go empty. Only water which has a prresure can go over the bend and moment the presurre is stopped, the last portion of water can not climb the full bend and therfore remain at the bottm of commode.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What was a toilet called in the 1900?

Commode / Water closet


How does a commode work to facilitate waste disposal and sanitation?

A commode is a type of toilet that uses water to flush waste into a sewage system. When you flush the commode, the water in the bowl carries the waste through pipes to a septic tank or a municipal sewage system. This helps to remove waste from the home and maintain sanitation.


How many gallons of water is wasted if a commode runs for 8 hours?

22


Constant water running in commode?

Install a new fill valve inside the tank. It is easy.


What height do you rough in for water for flushometer type commode?

Handicapped ? residential? hospital type with bedpan washing capabilities?


What causes commode to re-flush when filling back up?

I want to known why i lose water pressure when i flush the commode? I have new fixture inthe comodes.How would i bleed the Bladder tank in the pump house?


What would cause a loud noise when the commode completely fills up?

The float valve shutting off the water flow.


What can cause a commode not to refill unless you shut off the water and then turn it back on?

I think your fill valve is clogged with seddiment.Just replace it.


How do you get the sewage drain pipe off the bottom of the commode--we are redoing the floor and can't get the commode up?

take the bolts off there should be two bolts on the bottom under plastic caps Turn water off at toilet, flush toilet to empty tank. Two nuts under decorative caps at the pedestal where it meets the floor.. lift toilet off after loosening. There is a wax ring seal that may offer a little lifting resistance.


How do you turn off water to the commode?

To turn off the water to the commode, locate the shut-off valve, which is usually found on the wall behind the toilet or near the floor. Turn the valve clockwise until it stops to shut off the water supply. If there isn't a valve, you may need to turn off the main water supply to your home. Always ensure the toilet is not in use before making adjustments.


What are the main parts of a toilet commode?

A toilet commode primarily consists of three main parts: the bowl, the tank, and the seat. The bowl is where waste collects, while the tank holds water used for flushing. Inside the tank, components like the flush valve and fill valve regulate water flow. Additionally, the toilet seat provides comfort and can be lifted for use.


What is the siphon jet in a commode?

A siphon jet in a commode is a plumbing mechanism designed to enhance flushing efficiency. It uses a jet of water that creates a siphoning effect, pulling waste and water from the bowl into the drain. This system helps to ensure a more effective and complete flush, reducing the likelihood of clogs. The siphon jet is typically located at the bottom of the toilet bowl, where it directs water flow during flushing.