because the mass of your body displaces some of the water. it has to go somewhere so the moved water forces the level to rise.
Above ground pool pumps are made to sit at or below the water level, not to pull water up. If placed above the water level, or away from the pool-side they will not circulate the water properly and may not even prime. For your well, a better option is to go for an in-ground pool pump - or better still, purchase a pump made for your particular application.
mabye cause the people that go in the pool (WARNING= dont drink pool water
The check valve between the spa and the pool is defective.
Maybe - maybe not. Here's an easy way to find out: Fill your pool to the normal level. Mark the water level on the side of the pool with a non-permanent marker. Fill a 5-gal bucket with water. Mark the water level also with the marker. Place the bucket next to the pool. Compare the water levels for a couple of weeks. If you have a leak in the pool, the water level in the pool will go down much faster than the water level in the bucket. If they go down at about the same rate, then no leak. ... I would modify the answer here by putting the bucket on the top step of the pool. If no step find a way to get the bucket partially submerged in the pool water. Reasoning here is that both bucket and pool water attain the same temps. k
When a pool leaks, water can go into the ground surrounding the pool or into the drainage system if the pool is connected to one.
If you are adding salt to a salt water pool with a salt water chlorination system and the TDS level does not go up then the problem probably lies with the chlorination system not working (the electrolysis unit or power supply). Adding salt directly to the pool will increase the TDS (Total Dissolved Salts) concentration of the water.
go in the water
siphon the water out with a hose. You can even get a siphon going with a pool vac hose. Just get the whole hose full of water in the pool, keep one end of it submerged in the pool put yous hand over the other end so no air can get into it lift it over the edge of the pool and when it is below water level let go. the water will just pour out until there is no more water in the pool.
Go to profile>my riding level> sit this exam.
Yes, but you should shock it so the water stays clear (do not go in after shocking until the chlorine is at a safe level 1-3ppm)
When the boat is first lowered gently onto the surface of the water, the surface level rises slightly, regardless of the boat's size, shape, or weight, or what it has on board. The boat floats because it has displaced an amount of water that weighs exactly as much as the boat does. That means it has pushed some water out of some volume that the boat now occupies. The water it pushed aside has to go somewhere, and the surface level in the pool must rise.
Too much water in your pool means the skimmers won't work properly. There's not enough suction to skim the debris from the top of the pool. Too little water and your skimmers will be sucking air and that will go into you system causing it to not work properly. Keep your water level about 2-3" from the bottom of the skimmer, or 1/4-1/2 the way up from the bottom. Go to: www.clean-pool-and-spa.com/above-ground-swimming-pool-filters.html www.clean-pool-and-spa.com/index.html for more great info.