Your skimmer line may be plugged up, in which case you may be able to blow it out with a Co2 cannister or a water bladder. Your water level may be too high, it should be about 1/2 way up the skimmer opening, or your weir may be stuck or completely gone. You can buy replacement weirs.
Attempting to obtain step by step diagrams connecting an above ground pool to a sand filter.
No your pool is considered a closed system all the water that you add goes only to the filtering system and back. If you put in too much water you will overflow the edges and make your skimmer less efficient. unless you have a floating pool skimmer then the pool will be able to change level without affecting the efficiency of the skimmer.
Add thru the skimmer box
The skimmer may not be working on your pool due to clogging, a malfunctioning pump, or a leak in the skimmer system. It is important to check for these issues and address them promptly to ensure proper functioning of the skimmer.
Your pool skimmer may not be working properly due to clogs in the skimmer basket, a malfunctioning pump, or a leak in the skimmer system. Regular maintenance and troubleshooting can help identify and fix the issue.
It won't work as a skimmer if your water level is above the skimmer. If you watch how the skimmer works, the water is pulled in over the skimmer door and it won't "skim" the floating debris off the surface of the water if the water level covers the entire opening, your skimmer will just suck in water that is below the surface. If you keep the water level so it's at least below the opening an inch or so, you should be o.k. If you've recently had alot of rain, you may need to drain some water out of the pool so your skimmers function properly.
To lower pool water below the skimmer, you can use a submersible pump or a garden hose to siphon water out. If using a pump, place it in the shallow end of the pool and let it run until the water level drops below the skimmer. Alternatively, you can create a siphon by placing one end of a hose in the pool and the other end at a lower elevation, then filling the hose with water and letting gravity do the work. Always ensure to monitor the water level to avoid damaging the skimmer or pool equipment.
Google Aladdin pool equipment ( Lilly Pad skimmer)
You only use the skimmer/s
There are suitable products available at your pool shop. avoid cleaners with phosphates as these feed Algae the last thing a pool needs. A good way to keep the ring of the pool is to have the skimmer working as well as possible or use a floating skimmer that will always work at optimum.
Adding algae control to the pool skimmer helps to disperse the chemical and coats the filter media.
Yes it can make a big difference to the amount of floating debris and dust that sinks into your pool. The ideal place for the static skimmer in a pool is down stream from the return jets (These are the jets that return filtered water to the pool) and down wind from the prevailing winds, this can be a bit more difficult to work out as the wind direction over a pool is strongly influenced by the building surrounding it. The fact is that very few pool builders get it right. if the skimmer ends up in the wrong position there is always the option of using a floating swimming pool skimmer skimmer. this type of skimmer is set to the suction of the pools filtration system and connected via hose to the vac plate over the leaf basket, It can be fastened in place or left to float free in the pool and will keep working regardless of water level, Check out the link below on floating skimmers