Sounds like a leak on the suction side of your equipment.
A pool plumbing diagram with a heater typically includes pipes that connect the pool to the heater, a pump to circulate water, a filter to clean the water, and valves to control the flow of water. The heater is usually placed after the filter and before the return to the pool.
Cartridge is not installed correctly or you have a crack in the manifold allowing dirty water to pass by the filter.
The best water filter for a hot water heater is a sediment filter. It helps to remove particles and debris from the water, preventing them from accumulating in the heater and causing damage.
The hose that leads to the water pump area is the return.
Signs of a failing water heater include insufficient hot water, strange noises coming from the unit, leaks or puddles around the water heater, and rusty or discolored water coming from the taps.
Signs that indicate a water heater is going out include: water not heating up properly, strange noises coming from the heater, leaks around the unit, and rust-colored water coming out of the taps.
the reason for water coming out from under the dash is that a hose could have broke or you have a problem with your heater. your heater works off of the water in the radaitor and since it gets hot from the motor well it serculates threw the heater and that's who your heater works
A high-quality sediment filter is the best choice for a water heater to ensure clean and safe water supply. Sediment filters can effectively remove particles and impurities from the water, preventing them from accumulating in the water heater and causing issues with water quality.
Check your heater hoses, that's where the water ciruclates into the heater from the water pump.
You do not have to turn the heater on until you are ready to heat the water, some installers put a tee or bypass before the heater so the water does not go thru the heater many do not since the heater is on the clean side of the filter, some people just want a bypass valve their in case the heater fails they can keep the water flowing around the heater, Take the cover off, start the filter up, start vacuumimg, when ready add your chemicals. continue running the filter get your water tested, when you feel you are about ready too swim turn the heater on too warm the water if you desire to.
You do not have to turn the heater on until you are ready to heat the water, some installers put a tee or bypass before the heater so the water does not go thru the heater many do not since the heater is on the clean side of the filter, some people just want a bypass valve their in case the heater fails they can keep the water flowing around the heater, Take the cover off, start the filter up, start vacuumimg, when ready add your chemicals. continue running the filter get your water tested, when you feel you are about ready too swim turn the heater on too warm the water if you desire to.
Symptoms of a bad water heater element include insufficient hot water, fluctuating water temperature, strange noises coming from the water heater, and discolored or foul-smelling water.