14kge means it's 14K gold electroplated, the U with arrow through it is the trademark of "Uncas" jewelry manufacturing company of New York, USA
A U with an arrow through it on a diamond ring does not have a significant meaning. It is most likely an engraving or marking of some kind.
If you see a sign that has a U, with the arrow through the U, inside a ring, it means No U-Turn. This means that you should not change the direction you are traveling at that intersection.
a jewish symbol
Yes it's real
First off, in case people do not know, the arrow has two ends. One is the tip with the actual impact point, and the other is the end with the vanes "feathers". On the end with the vanes there is a notched piece called a nock. The nock is what clips onto the bow string. Now, the brass ring is used as a mark to seat your arrow at. When nocking your arrow, that is putting it on the string, you slide the nock of the arrow up to where it is touching the brass ring. The nock would sit under the ring, in essence giving you the same nocking point every time which allows for more consistent shot placement.
There should be a arrow on top of the piston close to the pistons edge. Your top ring's gap should be on same side as arrow. Then alternate next ring 180 degrees from last gap. The arrow should facing forward when installed into the jug.
It means that the ring was made by the Uncas Manufacturing Company, located in Providence Rhode Island.
If there is a + and - at the ends of the arrow as well, it's a DC supply pictogram (8volt) The U with the arrow is the hallmark for Uncas, it is a jeweler established in 1911. ADDED:: the 8 is the size
The iron boots are located inside of ICE RING ISLE (E6). When you arrive at ICE RING ISLE, shoot a fire arrow into the dragons mouth.
The last I saw was silver with a red stone circled by Order of the Arrow. Check with your local Scout Shop or look on eBay.
Peal is a word meaning ring a bell.
Heating the ring will cause it to expand, increasing the size of the ring's opening. This will make it easier for the metal ball to pass through the ring after it has been heated.