yes it can and very easy to do ... however im thinking its illegal in most if not all states
To remove the cartridge plug from a Charles Daly 12 gauge shotgun, first ensure the shotgun is unloaded and pointed in a safe direction. Locate the magazine cap at the end of the forend and unscrew it counterclockwise. Once the cap is removed, you can access the cartridge plug inside the magazine tube. Pull the plug out gently, making sure to follow any specific instructions in the owner's manual for your shotgun model.
yes
No
just unscrew the endcap to the magazine tube and insert a small flat-tip screwdriver and push and turn, the spring and plastic plug can then be removed.
remove magazine cap get a medium or large flat srewdriver push down on the plastic piece t1/4 turn clock wise and the spring and will come out refer to your owners manual if you dont have one go to a place that sells the gun and ask to see a manual.
The radiator plug can be located on the bottom of the radiator. The plug can be removed with a half inch ratchet.
The purpose of a dishwasher knockout plug is to prevent water from leaking out of the dishwasher connection. It can be removed by using pliers to twist and pull it out of the connection.
There is no drain plug. Pan must be removed.
It does not have a drain plug. The pan is removed to drain the fluid.
Many Yardman Lawnmower models do not have a drain plug. If no drain plug is found the oil has to be removed by the oil fill tube.
The 1991 Ford Tempo radiator plug is on the bottom of the radiator. The plug can be removed with a half inch ratchet.
It does not have a A/T drain plug. The pan must be removed.