Hit it hard with a hammer. Either the lock will break open, usually what happens, or you'll break whatever the lock is on.
The old fashioned way, a hammer and nail. Put the nail between the lock and the suitcase and hammer it in until it breaks the lock off.
break it open with a hammer or something or pick the lock (if there is one)
Easy take of the black cover with a hammer, Break out the tail lamp assembly and cut out the lock
Breaking a chain lock typically involves using force to break the chain or the lock itself. This can be done by using tools like bolt cutters, a hammer, or a crowbar to break the chain or the lock mechanism. It is important to note that breaking a chain lock is illegal and should only be done in emergency situations or with proper authorization.
Because your emergency break is stuck. You will half to bang it with a hammer to free it up.
It will cause less damage to trunk by drilling through it with a cobalt drill.
JUST TAKE A HAMMER OF SOMESORT AND HIT IT AS HARD AS YOU CAN!! That's what i did and it worked
Master Lock offers a variety of padlocks, U-locks and combination locks. The standard way to open the Master Lock is to insert a key into the keyhole and turn it as you would any other lock. However, it's also possible for you to break open a Master Lock if you don't have the key. This method is good if you need to open the lock quickly, and picking the lock would take too long.Follows these instructions to open a master lock withou a key :1. Cut the metal loop off the lock with bolt cutters. Place the bolt cutters around the loop of the lock and apply pressure until the cutters break through the loop.2. Break a Master Lock U-lock with a hammer. Hit the loop of the lock directly at the curved portion of the loop. By hitting the right spot, the loop can be released from the body of the lock. This may take a few attempts to find the right spot.3. Break a combination lock with a screwdriver or shim. Pry the numerical dial off the front of the combination lock. Slip the screwdriver or shim under the numerical front and apply upward pressure. Break the center metal piece of the lock. Stick the screwdriver or shim in the hole on the front of the lock and move it around until the metal piece is loose and the loop of the lock releases.
Usually a large channel lock plier will do the trick, if it still wont come loose, break out the hammer.
A bike lock is easy to use when it is easy for the owner to lock and use, but difficult for a thief to crack or break. It should have a lock that can be opened either with a key or combination.
To open a frozen lock, you can try using a de-icer spray, a hairdryer to melt the ice, or a lubricant like WD-40. You can also try gently tapping the lock with a hammer to break up the ice. Be patient and avoid using excessive force to prevent damaging the lock.