To disassemble the bolt on a Remington Model 721 rifle, first ensure the rifle is unloaded and the safety is engaged. Then, remove the bolt from the receiver by pulling the bolt handle fully to the rear and pressing the bolt release located on the right side of the receiver. Once the bolt is out, you can disassemble it further by unscrewing the firing pin assembly from the rear of the bolt body, allowing for access to the firing pin and spring. Always refer to the manufacturer's instructions or a gunsmith for specific guidance and safety precautions.
Go to Remington's web site and request a manaual
take bolt off
slide the spring to the 2nd hole and go from there
remington 725 caliber 222 bolt action excellant condition
Model 581.
Available from the Remington Custom shop- Model 7.
To disassemble a Sears model 5 rifle, first ensure the firearm is unloaded by removing the magazine and checking the chamber. Next, remove the action from the stock by unscrewing the screws that secure it. Then, separate the bolt from the receiver by pulling the bolt handle back and lifting the bolt out. Finally, you can further disassemble the bolt and other components as needed, following the manufacturer's instructions or a detailed schematic for guidance.
Depends on the model, is it a pump, bolt???
100-500
100-300 or so
A 1950's model 33 bolt action Remington 22 rifle is worth roughly $275. However, this can vary greatly depending on who purchases it, and what kind of condition it is in.
Remington didn't make a model 55 rifle, nylon or otherwise. Autoloader, lever, or Bolt, Clip or Tub, letters on left side of barrel?