0
Tap it gently. that's all it takes!
This is from the manual:
Your rifle has been sighted-in and test-fired at the factory. Due to individual shooting characteristics, however, sighting should be range verified.
1.) Vertical Correction (Elevation)
To raise the point of impact, raise the rear sight, by moving the sight elevator rearward. To lower the point of impact, lower the rear sight, by moving the sight elevator forward. The sight can be raised and lowered by moving the stepped elevator forward and back with your thumb.
To move the point of impact to the left, tap the rear sight base to the left. To move
the point of impact to the right, tap the rear sight base to the right.
Windage adjustments to the rear sight can be made by gently tapping the dovetail portion of the rear sight in the desired direction.
What else can I help you with?
Can you replace the front sight on a Marlin Model 30a?
Yes, you can replace the front sight on a Marlin Model 30A. The process typically involves removing the existing sight from the barrel, which may require a sight tool or punch, and then installing a new front sight that is compatible with the model. Ensure that the replacement sight is properly aligned and secured to maintain accuracy. Always consult the manufacturer's guidelines or a gunsmith if you're unsure about the procedure.
Is a marlin model 21 shotgun safe to shoot?
When in doubt have a qualified gunsmith examine your Marlin model 21 shotgun.It is far cheaper to have it examined,then to loose your eye sight or worse.
Marlin model 3000 cannot find any information on this in any of the books What is the circa and parent model?
The Marlin Model 3000 was the chain-store version of the Model 336. They added a gold trigger, gold bead sight and have no checkering.
How do you adjust the sites on a marlin 512 deer master missing to the right?
To adjust the sights on a Marlin 512 Deer Master that is shooting to the right, you need to move the rear sight to the left. This is done by loosening the screws that hold the rear sight in place, then gently tapping it left with a soft mallet or pushing it manually. If the rifle has a front sight that is adjustable, you can also adjust that by moving it slightly to the right. After making adjustments, always test fire to ensure accuracy.
Where can you find rear sight for a Marlin model 98?
Numrich gun parts corp.They may be found on the web.
When was a marlin model 80 made?
Model 80 1934 to 1939 Model 80-E 1934 to 1939 peep sight with hooded front sight Model 80-C 1940 to 1970 semi-beavertail forearm Model 80-DL 1940 to 1965 semi-beavertail forearm with peep sight
How do you get the rear sight off a marlin model 75?
To remove the rear sight from a Marlin Model 75, first ensure the firearm is unloaded and safe to handle. Locate the screws securing the rear sight to the receiver; typically, there are two screws on either side. Use a suitable screwdriver to carefully remove these screws. Once the screws are out, gently lift the rear sight off the dovetail or mounting area.
Age and estmate value of Marlin Model 336 35 cal serial 24133849 Williams rear peep sight excellent cond old leather sling?
the value of marlin model 336rc 30 30
When was a marlin model 55-12 serial?
behind the rear sight bracked on the left side just above the stock
Is the marlin cc440 the same as the marlin model 70?
Pretty close. The CC440 was the version made for and sold by Coast to Coast stores. It has a slightly different sight, wood is a little different.
Where can you find parts for a J C Higgins Model 103 16 22 Cal model 103.228-22cal?
gunpartscorp.com You can also search for Marlin model 80 parts seeing as how the J.C. Higgins is a clone of the model 80 and Marlin is easier to get parts for. I got a model 80 elevation key for the rear sight from the sight and looked and fit exactly the same as the old one I lost off my J.C.
What year is the marlin model 80 bolt action 22 from?
The Marlin model 80 was made from 1934 to 1939. Later improvements of the original model 80 such as the 80E, 80C, 80DL & 80G were made all the way up to 1965. There were many sight & stock configurations giving the rifle a different model number suffix.
