0
To change the firing pin on an Accu-Tek HC380, first ensure the firearm is unloaded and the magazine is removed. Disassemble the pistol according to the manufacturer's instructions, typically by removing the slide from the frame. Locate the firing pin assembly, which is usually secured by a retaining pin or spring; remove this component carefully. Replace the old firing pin with a new one, reassemble the firearm, and ensure everything is functioning correctly before use.
What else can I help you with?
What is a ACCU-TEK 380 cal worth?
50-75 USD
What is a ACCU TEK 380 cal worth?
50-75 USD
How can i tell What year was my Accu-tek made?
No known sn data has been published.
What is the approximate value of an accu-tek model hc 380 automatic with serial number h003943?
60 or so
Model at-380 accu-tek gun prize?
You have not asked a question yet. Please reword it, and try again.
How is a Accu Tek HC380 firing pin replaced?
Remove the slide. Push firing pin forward with 1/16" pin punch & then put a 3/32" pin punch between the back end of the firing pin & the back of the slot in the slide to hold the firing pin forward. Place the end of a small straight tip screwdriver between the right side end of the safety & the interior wall of the slide. Now twist the screwdriver to move the safety out to the left side of the slide. As you do this slowly, be carefull not to let the safety plunger & spring fly away on you. Mine tends to pretty well stay in the hole & not fly out. Once you have the safety out of the slide, carefully remove the 3/32" pin punch holding the firing pin forward to allow removal of the firing pin & spring. Reverse the procedure to reinstall.
When was Düm Tek Tek created?
Düm Tek Tek was created in 2008.
Does walgreen's sell nail tek?
nail tek renew
When did Vedat Tek die?
Vedat Tek died in 1942.
When was Vedat Tek born?
Vedat Tek was born in 1873.
When was Tek Jansen created?
Tek Jansen was created in 2005.
When was Ong Iok-tek born?
Ong Iok-tek was born in 1924.
