go too sears.com and look for the part in storage or go to sears and ask the manager
To disassemble a Sears model 5 rifle, first ensure the firearm is unloaded by removing the magazine and checking the chamber. Next, remove the action from the stock by unscrewing the screws that secure it. Then, separate the bolt from the receiver by pulling the bolt handle back and lifting the bolt out. Finally, you can further disassemble the bolt and other components as needed, following the manufacturer's instructions or a detailed schematic for guidance.
take bolt off
Best to get a gunsmith to help you.
slide the spring to the 2nd hole and go from there
Open the action and fire it while pulling the bolt toward you as if you were aiming the gun.
To disassemble the Cooey Model 60 bolt, first ensure the firearm is unloaded and the safety is engaged. Remove the bolt by pulling the bolt handle fully back and then lifting it out of the receiver. Next, locate the bolt stop and push it down to release the bolt body from the bolt handle. Once separated, you can further disassemble the bolt by removing any screws or pins as needed for cleaning or maintenance. Always refer to a specific manual for detailed instructions.
To disassemble Savage Model 29, separate the operating handle from the breech bolt. Move it halfway before pushing down.
There is a pin that has to be driven out. It passes thru the front section of bolt and is off-center
The 282 is the Winchester model 521 made for sears
the model 583.16 is a j.c. Higgins "model 10" bolt action. sears has issued a volentary recall on them. at the time of the recall they were offering a $160 "finders fee" for the return of the bolt from the shotgun .
None