Field strip the weapon down to the bolt and bolt carrier and then use a steel punch to drive out the firing pin retainer pin on the back edge of the bolt. The firing pin and firing pin rebound spring will drop out into your hand. To reverse that, put the bolt face down on a table and force the firing pin/spring forward into the slot to allow the retainer pin to be replaced. Reassemble weapon as usual.
the 500 is the whole series of shotguns, including all guages, the "a" means it's a 12 guage.
The Mossberg 500 Stock is the stock for the Mossberg 500 shotgun. The stock would allow you to get a better grip on the shotgun and absorb some recoil from firing the shotgun.
Not likely. The 930 is a gas operated semi-automtic. The 500 is a pump.
If you have a 500, and it is a 12 gauge, it is a 500A. The "A" designates it as a 12ga. A 500B is a 16ga, a C is a 20ga, and an E is a .410.
I acquired a Mossberg 500 AG shotgun. It has never been fired and might be 10 years old. What is the value?
50-500 usd
100-300 or so
H 302444
no
1961
firingpin
Yes, you can....but the chamber on the 500 barrel is only bored for 3" max shells. You won't be able to fire 3.5" shells through the 500 barrel.