The Glenfield Model 10 is a single shot .22 rimfire rifle. 1. Open the bolt by rotating the bolt handle up then pulling back. This will open the loading chamber and ready the gun for loading. 2. Place a single round of .22 short, long or long rifle ammunition in the open loading chamber, bullet facing forward. 3. Push the bolt handle forward until it stops, this will push the single round into the firing chamber or breech. Rotate the bolt handle downward to lock the chamber closed. 4. Cock or arm the firing pin by pulling back the knob on the back of the bolt until it locks the rearward position. Do this with the gun pointed in a safe direction as there is not any kind of mechanical safety on this rifle. 5. The rifle is now loaded, cocked and ready to fire. Discharge the rifle by pulling the trigger with the gun pointed in a safe firing direction. 6. Repeat steps 1 through 5 each time you wish to fire the rifle. As I mentioned earlier, there is no manual safety integrated into this gun. The safety feature is to not cock the rifle until you are ready to fire, that way a round can be chambered safely while hunting small game. These are very accurate little guns, I hope you enjoy it. Safe shooting.
To load a Glenfield Model 60 .22 caliber rifle, first ensure the rifle is pointed in a safe direction and the safety is engaged. Open the action by pulling back the bolt and then insert a loaded magazine into the receiver until it clicks into place. To fire, disengage the safety, aim at your target, and pull the trigger. After firing, the action will automatically cycle to load the next round from the magazine.
I have a glenfield - from the marlin fire arm co,,model 25 , im looking for the bolt for it.so if any one can help me,e-mail me at wthugo@yahoo.com thank you Gerald
Mine says. short-long & long rifle, right on the barrel.
They will fire the standard .22 short,.22long,and .22 long rifle cartridges.
100 USD or so
the 32 Winchester special lever action model 94 shoots a center fire, rimmed cartridge.
30/06
Sign up for a hunter safety course. This should be a single-shot bolt action rifle, about the simplest firearm action there is.
The Glenfield Model 10-22 was produced by Marlin Firearms and was made from the late 1960s until the early 1980s. Specifically, it was introduced in 1966 and continued through the early 1980s. The rifle was designed to fire .22 Short, .22 Long, and .22 Long Rifle cartridges.
Uses .277 bullets
To load the Glenfield Model 60, first ensure the firearm is pointed in a safe direction and the safety is engaged. Open the bolt by pulling it back and then rotating it upward to expose the chamber. Insert a .22 caliber cartridge into the chamber and close the bolt, ensuring it is fully locked. Finally, disengage the safety when you're ready to fire.
Generally speaking, no. You can only fire the caliber for which the gun is chambered. There are some exceptions, but not many.