0
To remove the slide from an Iver Johnson TM22PB Trailside:
(1) pull the slide back
(2) push down on the take down button (top of the slide in front of the rear sights)
(3) push the slide forward (if you did this correctly the recoil spring is pinned and the slide will not be forced closed).
(4) take the side grips off
(5) drift the mainspring housing pin out
(6) remove the mainspring housing (the spring is pinned so there's no worry of anything launching).
(7) take the slide off
Cheers
What else can I help you with?
How do you remove slide from Iver Johnson 22 semi auto?
To remove the slide from an Iver Johnson TM22PB Trailside: (1) pull the slide back (2) push down on the take down button (top of the slide in front of the rear sights) (3) push the slide forward (if you did this correctly the recoil spring is pinned and the slide will not be forced closed). (4) take the side grips off (5) drift the mainspring housing pin out (6) remove the mainspring housing (the spring is pinned so there's no worry of anything launching). (7) take the slide off Cheers
How do you break down a Iver Johnson 380 pony?
To break down an Iver Johnson .380 Pony, first ensure the firearm is unloaded. Then, remove the magazine and check the chamber. Next, pull back the slide slightly to align the slide stop with the notch on the frame, and then push the slide stop out from the left side. Once the slide stop is removed, slide the frame forward to separate it from the slide and barrel assembly, allowing for cleaning and maintenance. Reassemble by reversing these steps.
How do you remove the cylinder from an Iver Johnson 67 Viking?
lift the top latch and remove cyl.
When was Iver Johnson created?
Iver Johnson was created in 1871.
When did Iver Johnson end?
Iver Johnson ended in 1993.
What is the value of an Iver Johnson Champion?
Iver Johnson Champion$200.
How do you remove the grip on Iver Johnson 22 supershot 9 shot revolver?
Remove the screw, tap lightly
Iver Johnson 22 mag riffe?
need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer
I have a Iver Johnson revolver serial?
My iver johnson has the serial # on the trigger guard
How do you field strip a 22 caliber Iver Johnson US carbine?
Ensure the gun is unloaded. Remove the magazine. Pull back the operating slide and visually inspect the barrel to make sure there is not a round chambered. Loosen the screw on the band on the forward end of the stock and slide the band forward. Remove the hand guard. Remove the screw just behind the trigger guard. Remove the stock. Pull back on the operating slide spring and hold it while pulling the operating slide spring guide out of trigger housing. Carefully relieve the tension on the spring, then slide the spring guide out. Remove the trigger housing retaining screw and the two trigger housing retaining pins. Lift the receiver away from the trigger housing. Remove the operating slide by sliding it forward. Lift out the recoil plate. (Careful – it is under tension from the firing pin spring). Remove the bolt and firing pin piece and slide them apart. You have now field stripped your Iver Johnson .22 cal. carbine.
Need information on a Iver Johnson slide action cal 22 sl lr serial number 000896?
go to: http://www.iverjohnsonarms.com
When did Iver Johnson start building guns?
The first iver Johnson firearms with this name appeared in 1883.
