In general the primer bulb draws fuel from the tank through the carb and then returns it to the tank. Look for "carb" and "tank" on the primer bulb and make the respective connection. A line should come from the tank to the carb. Another from the carb to the primer. and another back to the tank.
The carburetor on a Weed Eater Featherlite SST25 is adjusted by turning the screws on the side of the carburetor. They control the idle mixture and idle speed of the engine.
by turning the screws on the side of the carburetor
To clean a carburetor on a weed eater, first, ensure the engine is cool and disconnect the spark plug for safety. Remove the carburetor from the engine, disassembling it carefully to access the float and jets. Use carburetor cleaner and a soft brush to clean all components, making sure to clear any clogs in the jets and passages. Reassemble the carburetor, reinstall it, and reconnect the spark plug before testing the weed eater.
Bad\dirty carburetor or not getting gas.
You need a"Pac Man" carb adjustment tool.
You can get rid of an old weed eater at a recycling center. If you take the weed eater apart, you can get money for the metal.
Mister Weed-Eater was created in 1993.
The exhaust could be plugged with carbon, carburetor has debris in it and needs to be cleaned, fouled spark plug
weed whacker
Throttle cable is probably pinched somewhere, or check the butterfly on carburetor, might have a broken return spring, or debris binding the shaft.
What type of oil does weed eater or7000
the correct name is weed whacker, weed eater is only used by people down south...the more common name is weed whacker because it is the tools name whereas weed eater is only a brand name and not the official name of the tool