A scope note is a brief description that clarifies the meaning and boundaries of a term used in a specific context, such as a controlled vocabulary or a thesaurus. It helps users understand the intended use of the term, including its nuances and any related concepts. Scope notes are particularly useful in information retrieval and indexing, ensuring consistent interpretation and application of terminology.
Drop and pout? Live without? It's all about? I hope I helped :$
to asses risks and note down injurys or hazards that have been noticed or have happened
That will depend on the scope and your eyes- but is ABOUT 3.5 inches. (Distance between your eye and the rear lens of the scope) It is the distance where you see the full image in the scope. You adjust it by sliding the scope forwards or backwards in the rings before tightening them down so that it fits YOU when holding the rifle in firing position. Please note- failure to pull a heavy recoiling rifle in TIGHT to your shoulder will result in a cut over your eye from being whacked with the scope.
He got a no scope he didnt scope his gun no no, no scope was involved He got a no scope and now hes killed someone their dead he shot him in the head He got a no scope what a wondrous feat what a marvelous kill i concede What do you get when you get real stressed quickly pull the trigger and hope for the best call them a noob and hump their chest I think you just got a no scope And where did your daddy go He abandoned you when you were only seven years old And living on the streets is cold you beg for food and money You beg for food and love You beg for food and care again No no no no no no no no no no Scope scope scope scope scope scope scope scope scope scope No no no no no no no no no no Scope scope scope scope scope scope scope scope scope scope He got a no,no,no scope
Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.
{| ! scope="col" | ! scope="col" | | ! scope="col" | ! scope="col" | | |}
To accurately sight in a rifle scope without using a boresighter, you can follow these steps: Securely mount the scope on the rifle. Set up a target at a known distance. Fire a shot at the target and note where the bullet hits. Adjust the windage and elevation knobs on the scope to move the crosshairs to the point of impact. Fire additional shots and make further adjustments until the shots consistently hit the target where the crosshairs are aimed.
No Scope....................
scope
If it has a scope rail or grooves for a scope mount then yes it will support a scope but you may need a scope stop to keep it from moving.
A logic scope is a scope that is virtually an irrelevant thermal paradox prophet.
{| ! scope="row" | Tamara Whatley! scope="row" height="18" |! scope="row" | Height: 5'8"! scope="row" | Hair: Brown! scope="row" | Eyes: Brown! scope="row" | Meas: 33-24-35! scope="row" |! scope="row" | FILM & TELEVISION! scope="row" | "Lucre"! scope="row" | Marie! scope="row" | Full Roast Productions! scope="row" | Gardenia Spiegel, Director! scope="row" | - ! scope="row" | "Kettle of Fish"! scope="row" | Beth! scope="row" | KOF Productions! scope="row" | Claudia Myers, Director! scope="row" | ! scope="row" | THEATRE| "Compatible" Woman Producer's Club, NY - "A Narrow Bed" Lucy Deena Levy Theatre, NY - "Tell Me About This Guy" Angie Deena Levy Theatre, NY ! scope="row" | - ! scope="row" | COMMERCIALS! scope="row" | available upon request! scope="row" | ! scope="row" | TRAINING! scope="row" height="20" | * Scene Study: Lesly Kahn, Deena Levy, Sande Shurin! scope="row" | * Williams on Movement: Cynthia Eisemann, Laura Danilov! scope="row" | * Voice & Speech: Beth Ann Cole, Carol Becall! scope="row" | * Improv: Don Puglisi, Tommy Futch! scope="row" | * On Camera: Dana Hensely, Colleen Patrick! scope="row" | ! scope="row" | SPECIAL SKILLS! scope="row" | Running, Yoga, Boxing, Kick-Boxing, Hiking, Driving Stick Shift, Bowling, Dancing, Basketball, Billards, Ping-Pong, Rollerskating, Telepromter, Southern Dialect, New York Accent, Excellent Ear For Dialects, Industrial Engineer! scope="row" | ! scope="row" | ||}