0
What else can I help you with?
What is the name of a kind of driver used of a four slotted screw?
Philips Phillips
What is the proper use of flat head screw driver?
to lossen or tighten slotted screws
What is slotted screw?
A screw with a slot in it.
Why are slotted head sheet metal usually installed manually using a flat blade screw driver?
Power drivers slip with slotted screws. They usually use Phillips head screws.
Remove and replace headlight on 1997 Nissan pickup?
I had to remove the front grill (slotted screw driver to turn the plastic clips 90 degrees, also had to take off the side running lights (philips screw driver) in order to get the head lamp out.
Where is the idle adjustment screw on a VW Vanagon?
It is a large slotted screw located on the throttle body.
What uses does a slotted screwdriver have?
Slotted screws were invented at a time when screws did not require so much torque to tighten them ,and when tool making was less complex. Now that many other screw drive systems have been invented, ( Philips, Robertson, Torx, Allen, Bristol etc) the slotted screw has gradually become an anachronism.
What is the difference between a machine screw and a cap screw?
A machine screw typically has a slotted or Phillips drive whereas a cap screw typically has a socket or torx head.
When was the flat head screw driver invented?
The flat head screwdriver was determined to be invented in the 15th century. They fit basic slotted screws and become one of the most versatile tools in the world.
What is a barrel nut?
A barrel nut is an internally threaded screw with a slotted head.
When and who invented the screw driver?
We do not know exactly WHO, but the time period was around 1475 in Germany. Screws were used for some industrial tools and for firearms. The slotted screw needed a tool to turn it, so someone made a tool to do that. The first screwdrivers were known as a turnscrew.
What is black and decker screw finder?
Slide on a quick change bit and screwThe screw finder is for slotted screws. Using a power drill/driver with slotted screws in one of the most frustrating jobs for handymen. Unlike Phillips head screws you must keep a right angle while driving and rely on your own coordination to keep the bit aligned with the slot. The screw finder slips around one of those long quick-change slotted bits and a flat head screw to take care of alignment. Answer #2This is what the piece looks likehttp://images.orgill.com/200x2006135248.jpg- the right end fits into the drill, the left side slips over the the screw itself. The screwdriver bit is actually inside
