An 042AVE is 68cc and generally will run a 16", 18" or 20" bar. They use a 3/8" full profile chain that has 60, 66 or 72 drive links respectively depending on bar length.
The Stihl 032 was introduced in 1978 and the maxrecamended bar length is 20". But I know from experiencethey can easilyhandle up to 24".
You can use several length bars on this saw. It looks like it came from the factory with a 20" bar.
Can I put a 18inch bar on a stihl
20 in. Bar
The Stihl chainsaw model 08S has 3.75 horsepower or 2.8 kW. The displacement is 60.3 cc, the length of the bar is 24.8 inches, and the weight is 15.9 pounds.
A STIHL 045 av is 75cc and the max recommended bar size for it is 32". However... If you have a 045 av Super then it would be 87cc and the max recommended bar length would be 36". So it depends if you have a SUPER or not. It is easy to tell as it will say SUPER on the top tag right below 045 av.
I run both a 24" bar and a 36" bar on my 064, but I run skip-tooth chain on the 36" bar, and switch over to the shorter bar whenever practical. yuou could get away with a bigger bar, but it would be hard on the saw, as well as slow cutting.
The Stihl 011 chainsaw is typically compatible with guide bars ranging from 12 to 16 inches in length. However, it's essential to check the specific model and user manual, as compatibility may vary slightly. When selecting a bar, ensure that it matches the chainsaw's specifications and the type of cutting you plan to do.
The Stihl 023 is 40.1cc - 2.45cu.in. -weight 10.1 lbs. w/o bar and chain
The Stihl 031AV chainsaw can typically handle a maximum bar length of 16 to 18 inches, depending on the type of wood being cut and the specific chain used. However, for optimal performance and to avoid excessive strain on the saw, it's generally recommended to stick to a 14 to 16-inch bar. Always consult the manufacturer's guidelines for specific recommendations and limitations.
Some Stihl chain saws have an adjuster underneeth the saw to turn up the oiler .
To measure the chain length on a Stihl chainsaw, you need to count the number of drive links on the chain. First, remove the chain from the guide bar and lay it flat. Count the drive links, which are the small, flat links that engage with the sprocket. The total number of drive links will determine the appropriate replacement chain size for your chainsaw model.