The drill hole size for an M16 bolt typically requires a clearance hole of about 17 mm in diameter. This allows for the bolt to fit through the hole without excessive tightness. For tapping threads, a hole size of approximately 13.5 mm is recommended to accommodate the M16x2 thread pitch. Always check specific requirements based on the application and material.
The M16 assault rifle's bolt and bolt carrier are made of steel.
A bolt.
If you mean a bolt with a head size of 24mm (M16) then the recommended torque setting will be 210Nm but if you mean a head size of 36mm (M24) then the recommended setting will be 710Nm.
A typical M16 bolt weighs around 0.28 ounces or 8 grams.
The M16 assault rifle has a 7075 aluminium alloy receiver, steel barrel, bolt, and bolt carrier, and glass-reinforced polymer handguard, pistol grip, and buttstock.
uh well there completly different guns...the m16 is a assualt rifle and the l96 is a bolt action rifle. m16 is probly the better choice if your trying to survive on a battlefield.
the bolt will remain open
5.56mm
Yes, an M16 bolt carrier can fit an AR-15 rifle, as both share a similar design and dimensions. However, the M16 bolt carrier includes a full-auto feature that allows for automatic fire, while the AR-15 is designed for semi-automatic operation. If an M16 bolt carrier is used in an AR-15, it must be paired with the appropriate fire control group to ensure safe and proper function. Always ensure compliance with local laws and regulations regarding firearm modifications.
4 major component groups of the m16 and there importance
Yes. However, a used bolt face should not be used with any barrel other than the one it was originally mated with.
The bolt carrier, the firing pin, the carrier pin, the extractor, the cam pin, the bolt, the extractor retaining pin.... that's the assembly, but the charging handle is also defined as part of the bolt carrier group.