Should be set at 0.015" to 0.016" gap
To set the gap on a Poulan chainsaw's magneto, you typically want to adjust it to around 0.020 inches (or 0.5 mm) using a feeler gauge. This ensures proper ignition and engine performance. To adjust, loosen the mounting screws, place the feeler gauge between the magneto and the flywheel, then re-tighten the screws once the gap is set. Always refer to your specific chainsaw model's manual for the exact specifications.
The spark plug gap for a Poulan 2150 chainsaw is typically set at 0.025 inches (0.635 mm). It's important to ensure that the gap is correctly set for optimal engine performance and efficient ignition. Always refer to the owner's manual for specific recommendations, as variations may exist based on the model or modifications.
.025
Plug gap should be .025" http://store.chainsawr.com/
The gap of the points on a 020 Stihl chainsaw typically refers to the ignition timing or the gap between the ignition coil and the flywheel. For the Stihl 020 model, the recommended gap is usually around 0.2 to 0.3 mm (0.008 to 0.012 inches). It's important to consult the specific owner's manual for your chainsaw for precise specifications. Proper gap settings ensure optimal engine performance and reliability.
plug gap should be .025" http://store.chainsawr.com/
0.020
.025" spark plug gap http://store.chainsawr.com/
Plug gap should be .025" http://store.chainsawr.com/
about the thickness of a business card, you can use this as a guide just to get you started.
0.9mm.
5 to 14 thousandths