Wash it .
A car coat is a light weight coat, heavier than a spring coat, but not as heavy as a winter coat. It is usually just above or below the knee and is to be worn over clothing to cover and/or protect your outfit.
Try using WD-40.
WD-40 and elbow grease.
Best is a wire brush and baking soda. You can use grease to coat the terminals to slow down the corrosion.
There are a couple of ways to go about removing wax from your car. 1. Wash the vehicle with a suitable wash such as P21s Total Auto Wash 2. Clay the vehicle with detailers clay* *This has been known not to completely remove tough waxes such as Collinite. 3. Use an AIO (all in one) cleaner Use an automotive safe wax & grease remover. Will remove the wax and not harm the clear or paint.
Yes it can if it has dried and your trying to remove it. It can damage your Clear Coat more than your actual car paint. If you remove it right away than no your car will be fine.
Warm soapy water and a soft cloth. Soap will break up the grease. Apply leather conditioner after throughly dry.
if you are trying to remove paint from the outer body of the car and you are looking to paint it. then start by sanding the outer body down to the bare metal then use your primary then first coat then second coat of paint
Use a rubbing compound. This requires a lot of elbow grease or an orbital polisher.
Using a grease removing soap (such as Dawn) and a toothbrush is one of the best ways to remove any blemish from the finish of a car. If that does not work you will have to resort to more drastic measures, such as Compounding.
its white and purple