Sounds like the TCM /PCM or wiring to them is having issues. Code 66 relate to no input From the TCM & PCM. I would check the wiring, plugs & harness and the TCM & PCM also as moisture apears to be the variable and that could very well be causing a wiring problem. Also if the BCM doesn't power up for 30 seconds or doesn't work this code will set so check it also. Going to need a multimeter, scanner and specs to do this right so you might want to take it in if you don't have access to these items.
What_size_engine_in_the_intrepid_has_engine_problems
The engine.
Buy an Lexus RX300, I have had it since 2000 with no problems unlike the 1998 Intrepid that I replaced. Open drivers door. On the side of dash there is a pannel with a handle in it. pull that off an there is the fuses. look on back of cover you pulled off to see what 1 it is.
trying to replace the starter on a 1995 3.3 dodge intrepid! what problems if any can i anticipate?
Cam sensor. Changed mine no more problems.
My 2000 Dodge Intrepid was made in Canada! Should have left it there, would have saved me years of problems and countless dollars in endless repairs. Wish I had never bought this car!
We have not had any problems. Please contact us directly to have it replaced.
Mine went. I bought another engine..was cheaper.
Fuel pump, bad ignition coil, computer problem.
You may need to have it rewired or have it replaced.
thermostat, electric fan, clogged system, head gasket problems? collapsed hose, low coolent.
most of the wiring diagram for the 96 intrepid ( I own the same car with 3.5) can be found on www.autozone.com. just click on repair manuals them select your car. I am also lookin for the Complete diagram. but most answers of the wiring problems can be answered there.