The TV is a MONO TV and you need a STEREO TV with audio output jacks to get the surround system to work. PS, what is a spdif?
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
For true surround, you need at least 4 speakers. There are systems that create a 'virtual surround sound' using acoustic tricks from a single array of speakers, but the effect is limited in frequency response and true surround realism.
If your TV has a digital audio output, connect it to the optical or coaxial digital input of the surround receiver. This will pass through the digital audio signal sent from a HDMI input at the TV.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
A Microphone does not output sound. It accepts sound. It is an input device.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
The microphone accepts the our sound signal and input it to the computer. the sound is transfered through communication media.in this way the microphone works.
The optical output of the PS3 can be connected to older surround sound receivers. Newer receivers can be connected with the HDMI cable.
For true surround, you need at least 4 speakers. There are systems that create a 'virtual surround sound' using acoustic tricks from a single array of speakers, but the effect is limited in frequency response and true surround realism.
Surround Sound was invented in 1843
If your TV has a digital audio output, connect it to the optical or coaxial digital input of the surround receiver. This will pass through the digital audio signal sent from a HDMI input at the TV.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
If your receiver has an HDMI input, use that. If it doesn't, then you will have to use analog or digital audio connectors to plug it in.
It does support surround sound but its recommended to get an amplifier if you do so.
Connect your PS3 to your TV then connect you surround sound to your TV.