I have seen on an Olds forum that the belt for the 86 olds 88 w/o a/c will work. It should be 75.5 in instead of 103 (the 1986 88 belt is 76.1 in)
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
Serpentine belt and pulley diagrams at www.alldatapro.com
Yes, buy a belt for a 1990 2500 V8 that came without A/C if they made such a truck.
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
changing serpentine belt and pulley 90' sedan deville
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
Open the hood and look. If it has a serpentine belt there is a tensioner.
from the bottom 13mm loosen idler pulley bolt then turn adjuster bolt under pulley
Try this website. You can bypass the AC with this bypass pulley bolted on and use the same serpentine belt as before. http://www.1aauto.com/1A/ACBypassPulley/Ford/FSeriesPickup/1AEPM00022/481685 JS
air conditioner eliminator pulley from autozone.com
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
found this bypass pulley: http://www.1aauto.com/1A/ACBypassPulley/Dodge/GrandCaravan/1AEPM00050/1089407