Try this website. You can bypass the AC with this bypass pulley bolted on and use the same serpentine belt as before. http://www.1aauto.com/1A/ACBypassPulley/Ford/FSeriesPickup/1AEPM00022/481685 JS
You mean the air conditioning compressor? It can be done, but you'll need to find a belt which will work for that application... it's a bit of a crap shoot, and I suggest you find some F150 forums to find out which belt you can do this with and how to route it, although there really is no need to bypass it.. as long as you have the AC turned off, the compressor clutch won't engage, and the pulley will spin freely.
You will not be able to route a different belt without the compressor even if you use a shorter belt but you can sometimes get what is called a "bypass" pulley for some of the models but I would need to know the year and engine size to see if one is available.......
Check with O'Reilly auto Parts or NAPA and they may have the replacement part.
Buy a "by-pass pulley" and you can use the same belt. copy and paste link: http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=A/C+Compressor+Bypass+Pulley&currentPage=1&categoryDisplayName=Climate+Control&navValue=15201187&itemId=1187-0&parentId=52-0
yes,a good parts man will give you a belt to bypass your ac.
How do I replace the block heater in my 1998 F150 4.6L?
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
No, 97-03 F150's have a 5x135 lug pattern.
I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine I need a diagram for a serpentine belt for a 1994 f150 with 5.0 engine There should be a sticker near radiator shroud that has belt routing. If not stick the belt down past the right side of fan/water pump .put belt on crank pulley then pull back of belt over water pump and then down around power steering pulley and up over compressor pulley. put belt from crank pulley around smog pulley then up to tensioner with back of belt around tensioner and then around alternator pulley.next put rachet and socket(15 mm) on tensioner and pull on it while placing belt under idler pulley.
there are three bolts under the transmission case by the converter clutch butterfly valve take them off and its under there but make sure you have completely removed the gasket
send it to a garage???????
how do I disable computer on Ford 150 1998
the clutch on your A/C compressor needs to be replaced.
Purchase a Freon recharge kit. Connects the Freon hoses to the ports on the air conditioner compressor. Release the Freon into the compressor.
on bottom side of engine
The vacuum diagram for a 1998 Ford F150 is located in the service manual. It details how each vacuum line is routed, where the line is attached, and its function.
yes. you just have to know what wires lead to and which ones to connect together
You may not bypass a smog pump. It is a part of the vehicle's emission's control system and bypassing it is a violation of federal law.
facing the engine you turn to the right it is r/ hand thread if you look at tne bolt head which is behind the pulley
5.7 Litres according to my manual