0
No, it will weaken the resin.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can mix polyester resin and oil paint?
It will not mix.
Can you mix interior semi gloss paint with interior egg shell paint?
No and yes it depends
How much semigloss and flat paint equal satin paint or eggshell paint?
If you mix a flat and semi-gloss 1:1 you should end up with a paint in the eggshell range. Mix the same paints 1:3 and you should end up with a satin. Experiment with small amounts to get the desired gloss.
Can you mix Dulux Weathershield with ordinary gloss paint?
Yes you can. The weathershield system is just a little more flexible than ordinary gloss paint, which can also be used externally, hence, why you can mix the two. All it will mean is the flexibility will be reduced, but when i paint exteriors i use standard gloss paint, and it lasts for years, as, the longevity is dependent on the preparation beforehand, ie, sanding down, priming bare timbers, and applying a generous layer of undercoat. Ordinary gloss paint, if preparation is done correctly, will last just as long as any weathershield product, and is half the price.
Is there an additive to make flat paint egshell?
If you want to call an equal amount of semi-gloss and additive then yes. Paint starts out as a gloss and is made flat by adding cheaper pigments and flatteners to the mix so that the paint doesn't have as high as a sheen. There's nothing that will remove or offset those flatteners other than adding higher gloss paint to the existing paint.
Can mix polyester resin and oil paint?
It will not mix.
Can you mix paint with polyester resin to color it?
yes
Can you mix interior semi gloss paint with interior egg shell paint?
No and yes it depends
Can you mix white satin latex paint with yellow semi gloss yellow paint?
Sure you can!it will work just fine
How much semigloss and flat paint equal satin paint or eggshell paint?
If you mix a flat and semi-gloss 1:1 you should end up with a paint in the eggshell range. Mix the same paints 1:3 and you should end up with a satin. Experiment with small amounts to get the desired gloss.
How do you get gloss paint out of carpet?
mix hot water and gin and wet the place were the paint is, the scrub away with the rough side of a sponge, will were paint stains down
Can you mix Dulux Weathershield with ordinary gloss paint?
Yes you can. The weathershield system is just a little more flexible than ordinary gloss paint, which can also be used externally, hence, why you can mix the two. All it will mean is the flexibility will be reduced, but when i paint exteriors i use standard gloss paint, and it lasts for years, as, the longevity is dependent on the preparation beforehand, ie, sanding down, priming bare timbers, and applying a generous layer of undercoat. Ordinary gloss paint, if preparation is done correctly, will last just as long as any weathershield product, and is half the price.
Is there an additive to make flat paint egshell?
If you want to call an equal amount of semi-gloss and additive then yes. Paint starts out as a gloss and is made flat by adding cheaper pigments and flatteners to the mix so that the paint doesn't have as high as a sheen. There's nothing that will remove or offset those flatteners other than adding higher gloss paint to the existing paint.
Can you mix satin paint and semi gloss paint and if you do will it give a dusty finish?
you can mix paint of different sheen levels provided they are of the same vehicle or base (i.e.. water based, oil based. Mixing a satin with a semi-gloss will still be reasonably close to an "eggshell" finish. The best way to know is to use the chart below and add the 2 sheen level percentages together and divide by 2.For example a low sheen (satin) is 20% sheen + Semi-Gloss which is lets say 50%20+50=70 divided by 2 = average sheen of 35% giving you an eggshell finish.Flat (1-9% gloss)Low Sheen (10-25% gloss)Eggshell (26-40% gloss)Semi Gloss (41-69% gloss)Gloss (70-89% gloss)
Can you mix semi gloss and gloss polyurathane?
Yes, you can
Why isn't water used in gloss paint?
Because it does not mix well.
Used expoxy paint-defective mix-how do you get the resin to dry?
the paint was used on pressure treated plywood.the first coat was mixed and applied as per instructions.the second coat came from a damaged/dented can but was mixed the same way the first one was.how to get the resin to to dry???
