Original Answer: Yes, the wide blade of the polarized plug would connect to the chassis of the radio. Another solution to the potential shock hazard would be to use an isolation transformer between the radio power plug and the power outlet. Correct Answer - NOT YET! Depending on which wire you choose to be the 'wide', or 'Neutral' blade, the chassis will either be 1) hot all the time, until switched on, or: 2) hot when switched on. Hallicrafters put the switch near the chassis ground because they felt this would remove 'hum' from the audio. Unfortunately it creates a hazardous situation that is only mitigated by having the chassis electrically separated from the cabinet by plastic spacers. If these plastic spacers fail, the cabinet could become hot.
To correct this, one needs to go inside the radio and SWAP where the 'on' switch: moving the 'newly polarized Neutral to the spot where the switch currently goes; then take the switch and move it between the newly polarized HOT line and where the old wire went. All that is needed is a soldering iron and possibly an additional few inches of 18-ga wire. For a pictorial view of what takes place, see: http://mikeyancey.com/S-38B_refurb.php
baby g is different from a g shock because of the design that the watch has. they might have totally different colors than regular g shock watches but the regular g shock watches have a wider selection to choose from.
State of Shock - band - was created in 1999.
They shouldn't if you get an electric shock while playing there is a fault with your equipment.
A shock absorber type unit attached to the drag link on the steering mechanism
Best I Ever Had - State of Shock song - was created in 2008-06.
The phrase "electrical shock hazard" means that there is a risk of electrical shock.
physical hazard,mechanical hazard,chemical hazard,electric shock hazard,crt monitor high voltage hazard.
physical hazard,mechanical hazard,chemical hazard,electric shock hazard,crt monitor high voltage hazard.
Protection from shock hazard.
It is a potential shock hazard.
Um, hazards? I guess... Kidnappers Thieves Serial killers People who do phishing (online) Gold Diggers Procrastination Satin Bullies Cliques Gangs
A polarized plug allows connection in only one direction. This ensures that electrical components with a higher risk of user contact, such as the shell of a lamp socket, as opposed to the center pin, is connected to neutral, and thus not presenting an electrocution hazard.
They're used to minimize the impact of collisions.A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. It is a type ofdashpot.
No, but they represent a shock hazard.
Minimize shock and prevent more injuries
too much power voltage may shock you, and depending on the level of power, the injuries vary.
Shock absorbers work to minimize the impact of daily wear and collisions on cars, shoes, and other items