answersLogoWhite

0


Best Answer

No it will not work

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use a 6 volt battery charger to charge a 12 volt battery?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you use a 12 volt charger to charge 14.4 volt battery?

Yes. The voltage of charger has to be slightly higher than the battery for it to be able to charge the battery.


Can you use a 12v charger to charge a 14.4v battery?

No, you must use a 14.4 volt charger.


Charge an eztec 9.6v battery?

If it is rechargeable use a 9.6 volt charger.


Can you charge a 12 volt ATV battery with a regular charger and if so what to put it on?

Yes, you can use a twelve volt car battery charger. Be sure to set it on low.


Can you use a 12 volt 2 amp charger to charge a 12 volt 7.2 amp battery?

Yes, you can.


Can you use a 12 amp charger to charge 6 amp battery?

You can charge a 12 volt battery with a 6 AMP charger. The amount of amps put out by the charger is actually the rate which the power flows out from the charger, not the amount of volts it will charge. Volts and Amps are two different things. You can't charge up a 12 volt battery all the way, using a 6 volt charger. You can charge a 12 volt battery with a 12 volt charger rated at '6 amps'. It will charge the battery faster than a 2 amp charger will, but it will take longer than using a 12 amp charger. You probably don't want to use anything higher than a 12-16 amp charger for charging a 12 volt battery. Some chargers are equipped with a 60amp boost charge that is used for starting the vehicle, without having much of a charge in the battery. You DO NOT want to attempt charging a battery with it set to a 60amp boost charge. That is for starting vehicles only and could damage your battery. Keep in mind that the lower the amps are, that you use to charge the battery (1-2amps), will result in the charge lasting longer without recharging it, than if it was charged up at a higher setting (12-16amps).


Can you charge a motorcycle battery with a car battery charger?

Yes as long as it is the right voltage: a 6v battery needs a 6v charger; a 12v battery needs a 12v charger. <><><> If you can set the battery charger's output to give either a 6 or a 12 volt output, then you must always remember to set it to 6 volts if you want to use it to charge a 6 volt motorcycle car battery.


Can use 14.4 volt charger to charge 18 volt battery?

Charger Output Voltage versus Battery VoltageNO, the output voltage of a charger must be greater than the rated voltage of the battery, usually at least one and a half to two volts difference.


Can you use 7.5 volt charger for 6 volt battery?

No, it will overcharge the 6 volt battery.


Can you use a 3 volt charger for a 9 volt battery?

No


Can you use a 24v battery charger on a 36v battery?

No, you need a 36 volt charger.


Can you use a 3.5 amp charger to charge a 12 volt battery?

You can charge a 12 volt battery with a 6 AMP charger. The amount of amps put out by the charger is actually the rate which the power flows out from the charger, not the amount of volts it will charge. Volts and Amps are two different things. You can't charge up a 12 volt battery all the way, using a 6 volt charger. You can charge a 12 volt battery with a 12 volt charger rated at '6 amps'. It will charge the battery faster than a 2 amp charger will, but it will take longer than using a 12 amp charger. You probably don't want to use anything higher than a 12-16 amp charger for charging a 12 volt battery. Some chargers are equipped with a 60amp boost charge that is used for starting the vehicle, without having much of a charge in the battery. You DO NOT want to attempt charging a battery with it set to a 60amp boost charge. That is for starting vehicles only and could damage your battery. Keep in mind that the lower the amps are, that you use to charge the battery (1-2amps), will result in the charge lasting longer without recharging it, than if it was charged up at a higher setting (12-16amps).