0
Does the engine have to be removed to replace the water pump on a 2004 Kia Sedona?
Wiki User
∙ 12y ago
no it does not you are able to get to it uder the black cover of timing belt
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Water pump 115 Johnson outboard?
does the lower unit need to be removed to replace the water pump on a 1995 Johnson 115 hp outboard engine
How much would it cost to replace timing belt and water pump on 2005 dodge grand caravan?
It varies according to who does it. Not cheap,as engine must be removed
How to replace timing chain on 2.4L olds alero?
To replace the timing chain on a 2.4L olds Alero you need to remove many parts. The parts that need to be removed are the drain coolant, the alternator, the air conditioning compressor, the water pump, and the harmonic balance. Once these parts are removed, you will need an engine hoist to lift the engine.
Water temperature sensor location 2002 Kia Sedona?
The water temperature sensor on a 2002 Kia Sedona is located on top of the engine, near the upper radiator hose. It relays the temperature to the vehicle's computer and triggers the cooling fan to come on.
How do you change water pump on 2002 Kia sedona?
how to change a water pump Kia Sedona 2002
Where is the water pump on a 1994 mercury villager?
The water pump is behind and above the crank pulley in the center of the front of the engine. It requires extensive disassembly to replace, the crank pulley and timing cover must be removed..
How to replace a water pump in a Chrysler Sebring?
It is driven by the timing belt and located behind the front engine plate. Both of them along with the upper traverse engine mount must to be removed to gain access to the pump. Also initially the dampener pulley must be removed using a special puller.
Why would a 350 motor leak water around the motormount?
If water is actually leaking there you have a bad freeze plug in the engine block... confirm by crawling underwith a good flashlight, the motor mount may have to be removed to replace......
How do you replace the water pump in a 1999 Chrysler Concorde?
if you have the 3.2 engine... you need to be an experience mechanic. The timing belt on this engine drive the water pump. Therefore, the radiator fans needs to be removed, the harmonic balancer ( special tool ) needs to be removed, then the timing belt needs to be taken off. A 2.7L is even worse, the front of the engine, valve covers, and intake manifold need to be removed. The pump is driven by a timing chain. Take it to a mechanic, this is not a DIY job.
Is there a Diagram on replacing water pump on Honda accord 1994?
The water pump is driven by the cam belt. This engine is an interference engine and as such it is critical that the cam belt be replaced correctly or severe engine damage will occur. In order to replace the water pump the cam belt must be removed. Unless you know what you are doing I suggest you take your car to a professional to have the water pump replaced and replace the cam belt at the same time. The cam belt must be replaced every 90,000 miles. If it breaks, severe engine damage will occur.
How do you replace thermostat housing on Chrysler 300 2.7liter?
The thermostat housing on a Chrysler 302.7 L engine can be removed by loosening the 3 housing bolts. Remove the water hose and the housing will come off. Reverse the process to replace with a new housing.
How do you replace the water pump on a 1992 Mercury Topaz?
what is the engine?
