0
Ford fiesta 1400 zetec idles too fast 1300 rpm Have changed the idle speed control valve but it made no difference Can anybody help please?
Wiki User
∙ 11y ago
I had the same problem and it turned out to be the temp sensor in between the spark plugs. Once replaced ran like a dream
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Can the fuel pump on a fiesta van be changed?
Sure it can be replaced.
When should a cam belt be changed on 03 fiesta?
As often as the manufacturer recommends
When should the cam belt on a ford fiesta 1.25 2001 be changed?
i had mine changed in Jan 2011 mileage 48000
Where is the rear windscreen wiper control on a 2000 Ford Fiesta?
boot
What is the difference between a MK3 and a MK4 Ford Fiesta?
just about everything
What milage should a timing belt be changed on a 2000 fiesta zetec s?
You must be referring to a European Ford as the Fiesta is no longer sold in the U.S. Gates has no listing for a 2000 Fiesta. All 2000 Fords with a belt that are listed require the belt to be changed at 120,000 miles. The Focus engine is an interferance engine, and if the belt breaks engine damage will occur. I suggest you call a Ford dealer to make sure on your Fiesta.
Ford Fiesta internal heating will not heat up?
Fiesta's have a common fault with the heater control valve failing closed. You can get a new one from Eaby for £15
How come my heater on my Ford Fiesta 1998 only works on number 4?
how is it my heater control on my ford fiesta flight 1998 only works on no. 4
How do you know when your 1996 Ford Fiesta needs the cambelt or timing belt changed?
It should be changed every 60,000 miles. I am not sure if it is an interference engine or not.
Change wishbones Ford Fiesta?
"Its not possible, the car must be scrapped." This just isn't true, I recently had the wishbones changed on my Ford Fiesta, it only cost about 40 quid or there abouts.
How do you connect a heater control valve on a mark 5 fiesta?
To connect a heater control valve on a mark 5 fiesta all the terminals must be correctly connected. The color coding is used to ensure that the terminals are correctly connected.
How do you remove the heater control unit on Mk8 fiesta?
Oh and it is cooking class right?
