L x W x thickness(convert inches to ft) = Cubic Feet(CF)
Then ... CF x density (approx 145# per cf) / 2000 = tons
Say you want a driveway 10' x 100' that will be 4 inches thick
Multiply 10 x 100 x .33(4/12) = 330 CF
Then 330 x 145 / 2000(ton=2000#) = 23.93 tons of Hot-Mix asphalt
Shorthand 145# per CF = 12.08# per sq in. | 4 inches x 12.08 = 48.32
thus 10 x 100 x 48.32 / 2000 = 24.16.
Even though there are decimal differences in these two examples they are more than acceptable for driveway asphalt estimates.
While asphalt density will vary some depending on the mix design and the aggregate used, a good rule of thumb is that it will take about 110# to cover a square yard one inch thick. Measure the sq ft and divide by 9 to get the area. Multiply this by 110 to get the pounds of asphalt needed, then divide by 2000 to convert it to tons required for a 1" thickness. Multiply by the thickness required to get the total tonnage required for the job.
form_title= Asphalt Paving form_header= Install asphalt in your home. Where are you installing asphalt?*= _ [50] Is there a certain design that needs to be paved?*= _ [50] What are the dimensions?*= _ [50]
Most paving is about 40% asphalt. So about 40% of a cubic yard.
My driveway needs repairing. Where can I find a company that supplies asphalt paving?
Check the phone book first, then do a search online for asphalt paving + your area. Try this site for asphalt pavers: http://www.b2byellowpages.com/directory/b2b_company_b2b_companies/asphalt-paving-companies.shtml.
The leveling course in Asphalt paving is used to eliminate irregularities in an existing condition to further superimpose the new paving.
asphalt
There is a company called APC, The Asphalt Paving Company. Other companies providing the same service are John R. Hulrley Asphalt, Avery Asphalt, Asphalt Coatings Company, Seal Coat Specialties. There are many others located in Colorado.
The main asphalt paving product is hot mix asphalt, in which asphalt cement is used to bind a mixture of stone, sand, and gravel.
The black paving of a road, such as asphalt.
The paving material is spelled "asphalt".
i do not know
The cost for asphalt paving varies slightly in the state of Montana as of 2014. The cost ranges between 2 and 4 dollars per square foot.