stick urwein in it
Because a transformer is a big lump of metal that takes time heat up, so if the load is on and off in a short time, the load rating can be exceeded.
hp or power is torque/time (rotating motor) 3000# can be lifted 10' in a minute with 1Hp 30,000# can be lifted 1' in a minute with 1Hp 1000 tons can be lifted 1' in an hour with 1 hp
The way to calculate standard time is simple. Standard time is calculated by taking observed time multiplying it by rating factor and then multiplying it by PFD (Personal, Fatigue, and Delay Allowance).
To calculate kWh a time component is needed for the hours.
WATER availability,line voltage,pump set head in meter,power rating,continuous time rating,prefered copper winding
8,822 for short periods of time
Formula to calculate CPRP: CPRP = Cost Of Rate Per 30 Minutes/ Rating Point Of That Time Band
You can calculate a speed by dividing a distance by the time it takes to cover that distance. If you want the instantaneous speed (for situations of variable speed), you need to calculate the distance and time for a fairly short time interval (ideally, the limit, when the time approaches zero).
if they are conectedright nothing but if not a short circut will happen. :)
TRP is a short form of "Target Rating Point". It is used to measure the Television audience target rating. That means how much audience watches in a time period.
You can calculate the quantity of energy that a motor turns into heat with either one of these equations: Heat energy = ( 1 - efficiency of the motor) x (energy input to the motor) or Heat energy = ( 1 - efficiency of the motor) x (power input to the motor) x (running time)
Maybe, maybe not. It would depend upon the rest of your current credit situation.