Hello. I just had to replace my turn signal and ignition switches on my 1997 Blazer. Part of the process was to remove the ignition cylinder. You will have to remove the lower steering column cover and then remove the two screws that secure the top cover in place. You will have toget the inverted Torx sockets to get the screws out. I bought a kit at Shucks(Kragen/Checker) for about $16.00. YOu will now be able to lift the top cover out of the way and get to a small hole on the top of the cylinder housing. Insert a small Allen wrench into the hole, and turn the key to the run position, the lock cylinder should come right out. Hope this helps.
You will need to attach the wiring harness to the end of your 1984 Chevrolet Blazer ignition lock cylinder. Slide the cylinder into the cylinder slot. Secure the ignition lock cylinder with the retaining ring.
There is 1 per cylinder.
how do i change a ignition cylinder on a 01 Monte Carlo
your a fatty
You can change the ignition cylinder on your 1999 Mercury Mystique by removing the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness.
this site will help
i need the bracket that the ignition cylinder slides into.... the piece that mounts to the stering column
You will need to remove the retaining ring from the top of your 1989 Chevrolet blazer ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
Remove the retaining ring at the top of your 1991 Acura Legend ignition switch. The ignition switch cylinder will slide out. Remove the wiring harness from the end of the ignition cylinder. Reverse the process to install your new ignition switch cylinder.
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
To change the ignition lock cylinder in a 2001 Chevrolet Tracker, first disarm the air bag system. Then remove the clock spring assembly to be able to remove the old ignition lock cylinder and replace with a new.