the light bulb is accessed from the under side of the car bulb is removed by turning the socket 1/4 turn counter clockwise If you are talking about the 3rd brakelight, Unscrew the brakelight mount and turn it so it is easy to unscrew the bulb first. Then unscrew the bulb, it may take a few tries to get it out. If you still have problems unscrew the top of the mount (they're the only screws left on the mount) then try to remove the bulb.
Check the brake light switch on the brake pedal. Might have to replace it.
You will need to remove the tire and wheel from your 1992 Chevrolet Caprice Classic. Remove the brake shoe spring and caliper. The brake shoes will come off. Reverse the process to install the new brake shoes.
its related the the abs system. (anti lock brakes) its an ebcm, electronic brake control module.
AnswerLook under the kick panel driver's side. Should be to the above left of the brake pedal.For 1991 and up Caprice, open the driver's door and remove the cover from the side of the dashboard.
check all brake bulbs a filiment may have shorted out
Possibly defective or misadjusted brake light switch.
the rotors are front mounted brake (pads) and the rear are usually the spring type ..also known as(shoes)
brake line has air...
Change in steps Get a Turkey baster and syphon brake fluid from master cylinder and refill with new Every time oil is changed Take out the moder cap, and then pour in the fluid.
check your e brake
DOT 3
Should be just up above on the brake pedal.