You must get a couple of so-called jumper cables. The cables have strong clamps on them and are designed to be clamped to the battery terminals. Attach the black cable to the negative terminals of the motorcycle and car battery first. Then attach the red or positive cable to the positive terminals of the motorcycle and the car battery. In case your motorcycle battery is empty, you can now start the bike from the car battery. Disconnect the cables in reverse order, beginning with the red cable. The motorcycle battery will not be charged much by the car battery but the bike can be jump started by using this method.
Very gently. A motorcycle battery can't take as much charging current as a car battery, so you need to use the lowest setting on your charger.
Yes as long as it is the right voltage: a 6v battery needs a 6v charger; a 12v battery needs a 12v charger. <><><> If you can set the battery charger's output to give either a 6 or a 12 volt output, then you must always remember to set it to 6 volts if you want to use it to charge a 6 volt motorcycle car battery.
In 24 hours it will be charged enough to start the car. You really need a much larger charger for a car battery.
yes, you can. BUT don't start the car! just connect the jumper cables from car to motorcycle wait 5 minutes and then try to start the motorcycle.
Depends on the amperage of the charger. A 10 amp charger will charge it in about 1 hour.
yes
Put a battery charger on it.
Yes. Cold weather can deplete the charge in any motorcycle, marine, or automotive battery.
No, It will charge ok while connected in the motorcycle.
To charge a car battery you need aproximatly 8000 amps To charge a car battery you need aproximatly 8000 amps
You can not charge a battery in the microwave.
Any 12 V battery charger will charge a motorcycle battery. But it is best to get one with low amperage such as a 4 to 6 amp battery charger. You can use a trickle charger to keep the battery charged on my motorcycle during storage.